新增了0.85tft屏幕版本的星智开发板 (#397)

* 新增了0.85tft屏幕版本的星智开发板

* 对调了0.85寸屏幕版本的星智连接ml307模块的TX、RX引脚

main/boards/xingzhi-cube-0.85tft-ml307/config.h

@@ -0,0 +1,40 @@
+
+#ifndef _BOARD_CONFIG_H_
+#define _BOARD_CONFIG_H_
+
+#include <driver/gpio.h>
+
+#define AUDIO_INPUT_SAMPLE_RATE  16000
+#define AUDIO_OUTPUT_SAMPLE_RATE 24000
+
+#define AUDIO_I2S_MIC_GPIO_WS   GPIO_NUM_4
+#define AUDIO_I2S_MIC_GPIO_SCK  GPIO_NUM_5
+#define AUDIO_I2S_MIC_GPIO_DIN  GPIO_NUM_6
+#define AUDIO_I2S_SPK_GPIO_DOUT GPIO_NUM_7
+#define AUDIO_I2S_SPK_GPIO_BCLK GPIO_NUM_15
+#define AUDIO_I2S_SPK_GPIO_LRCK GPIO_NUM_16
+
+#define BOOT_BUTTON_GPIO        GPIO_NUM_0
+#define VOLUME_UP_BUTTON_GPIO   GPIO_NUM_NC
+#define VOLUME_DOWN_BUTTON_GPIO GPIO_NUM_NC
+
+#define DISPLAY_SDA GPIO_NUM_10
+#define DISPLAY_SCL GPIO_NUM_9
+#define DISPLAY_DC GPIO_NUM_8
+#define DISPLAY_CS GPIO_NUM_14
+#define DISPLAY_RES GPIO_NUM_18
+#define DISPLAY_WIDTH   128
+#define DISPLAY_HEIGHT  128
+#define DISPLAY_SWAP_XY  false
+#define DISPLAY_MIRROR_X false
+#define DISPLAY_MIRROR_Y true
+#define BACKLIGHT_INVERT false
+#define DISPLAY_OFFSET_X  0
+#define DISPLAY_OFFSET_Y  0
+#define DISPLAY_BACKLIGHT_PIN GPIO_NUM_13
+#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false
+
+#define ML307_RX_PIN GPIO_NUM_11
+#define ML307_TX_PIN GPIO_NUM_12
+
+#endif // _BOARD_CONFIG_H_