forked from xiaozhi/xiaozhi-esp32
b7db68457c
* Upgrade component version * update fonts component version * Handle OTA error code * Update project version to 2.1.0 and add device state machine implementation - Upgrade esp-wifi-connect to 3.0.0, allowing reconfiguring wifi without rebooting - Introduce device state machine with state change notification in new files - Remove obsolete device state event files - Update application logic to utilize new state machine - Minor adjustments in various board implementations for state handling * fix compile errors * Refactor power saving mode implementation to use PowerSaveLevel enumeration - Updated Application class to replace SetPowerSaveMode with SetPowerSaveLevel, allowing for LOW_POWER and PERFORMANCE settings. - Modified various board implementations to align with the new power save level structure. - Ensured consistent handling of power save levels across different board files, enhancing code maintainability and clarity. * Refactor power save level checks across multiple board implementations - Updated the condition for power save level checks in various board files to ensure that the power save timer only wakes up when the level is not set to LOW_POWER. - Improved consistency in handling power save levels, enhancing code clarity and maintainability. * Refactor EnterWifiConfigMode calls in board implementations - Updated calls to EnterWifiConfigMode to use the appropriate instance reference (self or board) across multiple board files. - Improved code consistency and clarity in handling device state during WiFi configuration mode entry. * Add cellular modem event handling and improve network status updates - Introduced new network events for cellular modem operations, including detecting, registration errors, and timeouts. - Enhanced the Application class to handle different network states and update the display status accordingly. - Refactored Ml307Board to implement a callback mechanism for network events, improving modularity and responsiveness. - Updated dual_network_board and board headers to support new network event callbacks, ensuring consistent handling across board implementations. * update esp-wifi-connect version * Update WiFi configuration tool messages across multiple board implementations to clarify user actions
ESP-Spot
简介
ESP-Spot 是 ESP Friends 开源的一款智能语音交互盒子，内置麦克风、扬声器、IMU 惯性传感器，可使用电池供电。ESP-Spot 不带屏幕，带有一个 RGB 指示灯和两个按钮。硬件详情可查看立创开源项目。
ESP-Spot 开源项目采用 ESP32-S3-WROOM-1-N16R8 模组或 ESP32-C5-WROOM-1-N8R8。如在复刻时使用了其他大小的 Flash，需修改对应的参数。
配置、编译命令
配置编译目标
idf.py set-target esp32s3 # Spot S3
# or
idf.py set-target esp32c5 # Spot C5
打开 menuconfig 并配置
idf.py menuconfig
分别配置如下选项：
Xiaozhi Assistant→Board Type→ 选择ESP-Spot-S3/ESP-Spot-C5
按 S 保存，按 Q 退出。
编译
idf.py build
烧录
idf.py flash
Tip
若电脑始终无法找到 ESP-Spot 串口，可尝试如下步骤
- 打开前盖；
- 拔出带有模组的 PCB 板；
- 按住 BOOT 同时插回 PCB 版，注意不要颠倒；
此时， ESP-Spot 应当已进入下载模式。在烧录完成后，可能需要重新插拔 PCB 板。
低功耗
ESP-Spot 支持 Deep Sleep 低功耗模式。
当处于 idle 状态 10 分钟后，ESP-Spot 会自动进入 Deep Sleep 模式，按 Key 键或摇晃 ESP-Spot 即可唤醒。