forked from xiaozhi/xiaozhi-esp32
147d71b9f1
* use main task to execute tool calls * feat: add snapshot mcp tool * fix compiling errors * 取消 audio input 的 pin core，core1留给显示，可能会对aec性能有影响 * update ml307 version * remove v1 theme colors
Build Instructions
One-click Build
python scripts/release.py sensecap-watcher -c config_en.json
Manual Configuration and Build
idf.py set-target esp32s3
Configuration
idf.py menuconfig
Select the board:
Xiaozhi Assistant -> Board Type -> SenseCAP Watcher
There are some additional configuration options for the watcher. Please select them in menuconfig:
CONFIG_BOARD_TYPE_SENSECAP_WATCHER=y
CONFIG_ESPTOOLPY_FLASHSIZE_32MB=y
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions/v2/32m.csv"
CONFIG_BOOTLOADER_CACHE_32BIT_ADDR_QUAD_FLASH=y
CONFIG_ESPTOOLPY_FLASH_MODE_AUTO_DETECT=n
CONFIG_IDF_EXPERIMENTAL_FEATURES=y
CONFIG_LANGUAGE_EN_US=y
CONFIG_SR_WN_WN9_JARVIS_TTS=y
Build and Flash
idf.py -DBOARD_NAME=sensecap-watcher-en build flash
Note: If your device was previously shipped with the SenseCAP firmware (not the Xiaozhi version), please be very careful with the flash partition addresses to avoid accidentally erasing the device information (such as EUI) of the SenseCAP Watcher. Otherwise, even if you restore the SenseCAP firmware, the device may not be able to connect to the SenseCraft server correctly! Therefore, before flashing the firmware, be sure to record the necessary device information to ensure you have a way to recover it!
You can use the following command to back up the factory information:
# Firstly backup the factory information partition which contains the credentials for connecting the SenseCraft server
esptool.py --chip esp32s3 --baud 2000000 --before default_reset --after hard_reset --no-stub read_flash 0x9000 204800 nvsfactory.bin