xiaozhi-esp32/main/boards/waveshare-c6-lcd-1.69/esp32-c6-lcd-1.69.cc

#include "wifi_board.h"
#include "codecs/es8311_audio_codec.h"
#include "display/lcd_display.h"
#include "system_reset.h"
#include "application.h"
#include "button.h"
#include "config.h"

#include <esp_log.h>
#include "i2c_device.h"
#include <driver/i2c_master.h>
#include <driver/ledc.h>
#include <wifi_station.h>
#include <esp_lcd_panel_vendor.h>
#include <esp_lcd_panel_io.h>
#include <esp_lcd_panel_ops.h>

#include <esp_timer.h>



#define TAG "waveshare_lcd_1_69"


LV_FONT_DECLARE(font_puhui_20_4);
LV_FONT_DECLARE(font_awesome_20_4);


class CustomLcdDisplay : public SpiLcdDisplay {
public:
    CustomLcdDisplay(esp_lcd_panel_io_handle_t io_handle,
                    esp_lcd_panel_handle_t panel_handle,
                    int width,
                    int height,
                    int offset_x,
                    int offset_y,
                    bool mirror_x,
                    bool mirror_y,
                    bool swap_xy)
        : SpiLcdDisplay(io_handle, panel_handle,
                    width, height, offset_x, offset_y, mirror_x, mirror_y, swap_xy,
                    {
                        .text_font = &font_puhui_20_4,
                        .icon_font = &font_awesome_20_4,
#if CONFIG_USE_WECHAT_MESSAGE_STYLE
                        .emoji_font = font_emoji_32_init(),
#else
                        .emoji_font = font_emoji_64_init(),
#endif
                    }) {
        DisplayLockGuard lock(this);
        lv_obj_set_style_pad_left(status_bar_, LV_HOR_RES * 0.1, 0);
        lv_obj_set_style_pad_right(status_bar_, LV_HOR_RES * 0.1, 0);
    }
};


class CustomBoard : public WifiBoard {
private:
    Button boot_button_;
    i2c_master_bus_handle_t i2c_bus_;
    LcdDisplay* display_;

    void InitializeI2c() {
        // Initialize I2C peripheral
        i2c_master_bus_config_t i2c_bus_cfg = {
            .i2c_port = (i2c_port_t)I2C_NUM_0,
            .sda_io_num = AUDIO_CODEC_I2C_SDA_PIN,
            .scl_io_num = AUDIO_CODEC_I2C_SCL_PIN,
            .clk_source = I2C_CLK_SRC_DEFAULT,
            .glitch_ignore_cnt = 7,
            .intr_priority = 0,
            .trans_queue_depth = 0,
            .flags = {
                .enable_internal_pullup = 1,
            },
        };
        ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_cfg, &i2c_bus_));
    }
    
    void InitializeSpi() {
        ESP_LOGI(TAG, "Initialize QSPI bus");
        spi_bus_config_t buscfg = {};
        buscfg.mosi_io_num = DISPLAY_MOSI_PIN;
        buscfg.miso_io_num = DISPLAY_MISO_PIN;
        buscfg.sclk_io_num = DISPLAY_CLK_PIN;
        buscfg.quadwp_io_num = GPIO_NUM_NC;
        buscfg.quadhd_io_num = GPIO_NUM_NC;
        buscfg.max_transfer_sz = DISPLAY_WIDTH * DISPLAY_HEIGHT * sizeof(uint16_t);
        ESP_ERROR_CHECK(spi_bus_initialize(SPI2_HOST, &buscfg, SPI_DMA_CH_AUTO));
    }

    void InitializeLcdDisplay() {
        esp_lcd_panel_io_handle_t panel_io = nullptr;
        esp_lcd_panel_handle_t panel = nullptr;
        // 液晶屏控制IO初始化
        ESP_LOGI(TAG, "Install panel IO");
        esp_lcd_panel_io_spi_config_t io_config = {};
        io_config.cs_gpio_num = DISPLAY_CS_PIN;
        io_config.dc_gpio_num = DISPLAY_DC_PIN;
        io_config.spi_mode = DISPLAY_SPI_MODE;
        io_config.pclk_hz = 40 * 1000 * 1000;
        io_config.trans_queue_depth = 10;
        io_config.lcd_cmd_bits = 8;
        io_config.lcd_param_bits = 8;
        ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi(SPI2_HOST, &io_config, &panel_io));


        // 初始化液晶屏驱动芯片
        ESP_LOGI(TAG, "Install LCD driver");
        esp_lcd_panel_dev_config_t panel_config = {};
        panel_config.reset_gpio_num = DISPLAY_RST_PIN;
        panel_config.rgb_ele_order = DISPLAY_RGB_ORDER;
        panel_config.bits_per_pixel = 16;
        // panel_config.vendor_config = &st7796_vendor_config;

        ESP_ERROR_CHECK(esp_lcd_new_panel_st7789(panel_io, &panel_config, &panel));
         
       
        esp_lcd_panel_reset(panel);
 
        esp_lcd_panel_init(panel);
        esp_lcd_panel_invert_color(panel, DISPLAY_INVERT_COLOR);
        esp_lcd_panel_swap_xy(panel, DISPLAY_SWAP_XY);
        esp_lcd_panel_mirror(panel, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y);

        
        display_ = new CustomLcdDisplay(
            panel_io, 
            panel,
            DISPLAY_WIDTH, 
            DISPLAY_HEIGHT, 
            DISPLAY_OFFSET_X, 
            DISPLAY_OFFSET_Y, 
            DISPLAY_MIRROR_X, 
            DISPLAY_MIRROR_Y, 
            DISPLAY_SWAP_XY
        );
    }

    void InitializeButtons() {
        boot_button_.OnClick([this]() {
            auto& app = Application::GetInstance();
            if (app.GetDeviceState() == kDeviceStateStarting && !WifiStation::GetInstance().IsConnected()) {
                ResetWifiConfiguration();
            }
            app.ToggleChatState();
        });
    }

public:
    CustomBoard() :
        boot_button_(BOOT_BUTTON_GPIO) {
        InitializeI2c();
        InitializeSpi();
        InitializeLcdDisplay();
        InitializeButtons();
        GetBacklight()->RestoreBrightness();
    }

    virtual AudioCodec* GetAudioCodec() override {
        static Es8311AudioCodec audio_codec(i2c_bus_, I2C_NUM_0, AUDIO_INPUT_SAMPLE_RATE, AUDIO_OUTPUT_SAMPLE_RATE,
            AUDIO_I2S_GPIO_MCLK, AUDIO_I2S_GPIO_BCLK, AUDIO_I2S_GPIO_WS, AUDIO_I2S_GPIO_DOUT, AUDIO_I2S_GPIO_DIN,
            AUDIO_CODEC_PA_PIN, AUDIO_CODEC_ES8311_ADDR);
        return &audio_codec;
    }

    virtual Display* GetDisplay() override {
        return display_;
    }
    
    virtual Backlight* GetBacklight() override {
        static PwmBacklight backlight(DISPLAY_BACKLIGHT_PIN, DISPLAY_BACKLIGHT_OUTPUT_INVERT);
        return &backlight;
    }
};

DECLARE_BOARD(CustomBoard);