forked from xiaozhi/xiaozhi-esp32
f501a5f440
* Update CMakeLists.txt WAVESHARE_C6_TOUCH_LCD_1_83 * Update Kconfig.projbuild WAVESHARE_C6_TOUCH_LCD_1_83 * Create README.md waveshare-c6-touch-lcd-1.83 * Add files via upload
262 lines
8.8 KiB
C++
262 lines
8.8 KiB
C++
#include "wifi_board.h"
|
|
#include "display/lcd_display.h"
|
|
#include "codecs/box_audio_codec.h"
|
|
#include "application.h"
|
|
#include "button.h"
|
|
#include "led/single_led.h"
|
|
#include "mcp_server.h"
|
|
#include "config.h"
|
|
#include "power_save_timer.h"
|
|
#include "axp2101.h"
|
|
#include "i2c_device.h"
|
|
#include <esp_log.h>
|
|
#include <esp_lcd_panel_vendor.h>
|
|
#include <driver/i2c_master.h>
|
|
#include <driver/spi_master.h>
|
|
#include "settings.h"
|
|
|
|
#include <esp_lcd_touch_cst816s.h>
|
|
#include <esp_lvgl_port.h>
|
|
#include <lvgl.h>
|
|
|
|
#define TAG "WaveshareEsp32c6TouchLCD1inch83"
|
|
|
|
class Pmic : public Axp2101 {
|
|
public:
|
|
Pmic(i2c_master_bus_handle_t i2c_bus, uint8_t addr) : Axp2101(i2c_bus, addr) {
|
|
WriteReg(0x22, 0b110); // PWRON > OFFLEVEL as POWEROFF Source enable
|
|
WriteReg(0x27, 0x10); // hold 4s to power off
|
|
|
|
// Disable All DCs but DC1
|
|
WriteReg(0x80, 0x01);
|
|
// Disable All LDOs
|
|
WriteReg(0x90, 0x00);
|
|
WriteReg(0x91, 0x00);
|
|
|
|
// Set DC1 to 3.3V
|
|
WriteReg(0x82, (3300 - 1500) / 100);
|
|
|
|
// Set ALDO1 to 3.3V
|
|
WriteReg(0x92, (3300 - 500) / 100);
|
|
|
|
// Enable ALDO1(MIC)
|
|
WriteReg(0x90, 0x01);
|
|
|
|
WriteReg(0x64, 0x02); // CV charger voltage setting to 4.1V
|
|
|
|
WriteReg(0x61, 0x02); // set Main battery precharge current to 50mA
|
|
WriteReg(0x62, 0x08); // set Main battery charger current to 400mA ( 0x08-200mA, 0x09-300mA, 0x0A-400mA )
|
|
WriteReg(0x63, 0x01); // set Main battery term charge current to 25mA
|
|
}
|
|
};
|
|
|
|
class WaveshareEsp32c6TouchLCD1inch83 : public WifiBoard {
|
|
private:
|
|
i2c_master_bus_handle_t i2c_bus_;
|
|
Pmic* pmic_ = nullptr;
|
|
Button boot_button_;
|
|
Display* display_;
|
|
PowerSaveTimer* power_save_timer_;
|
|
|
|
void InitializePowerSaveTimer() {
|
|
power_save_timer_ = new PowerSaveTimer(-1, 60, 300);
|
|
power_save_timer_->OnEnterSleepMode([this]() {
|
|
GetDisplay()->SetPowerSaveMode(true);
|
|
GetBacklight()->SetBrightness(20); });
|
|
power_save_timer_->OnExitSleepMode([this]() {
|
|
GetDisplay()->SetPowerSaveMode(false);
|
|
GetBacklight()->RestoreBrightness(); });
|
|
power_save_timer_->OnShutdownRequest([this](){
|
|
pmic_->PowerOff(); });
|
|
power_save_timer_->SetEnabled(true);
|
|
}
|
|
|
|
void InitializeCodecI2c() {
|
|
// Initialize I2C peripheral
|
|
i2c_master_bus_config_t i2c_bus_cfg = {
|
|
.i2c_port = I2C_NUM_0,
|
|
.sda_io_num = AUDIO_CODEC_I2C_SDA_PIN,
|
|
.scl_io_num = AUDIO_CODEC_I2C_SCL_PIN,
|
|
.clk_source = I2C_CLK_SRC_DEFAULT,
|
|
.flags = {
|
|
.enable_internal_pullup = 1,
|
|
},
|
|
};
|
|
ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_cfg, &i2c_bus_));
|
|
}
|
|
|
|
void InitializeAxp2101() {
|
|
ESP_LOGI(TAG, "Init AXP2101");
|
|
pmic_ = new Pmic(i2c_bus_, 0x34);
|
|
}
|
|
|
|
void InitializeSpi() {
|
|
spi_bus_config_t buscfg = {};
|
|
buscfg.mosi_io_num = DISPLAY_MOSI_PIN;
|
|
buscfg.miso_io_num = GPIO_NUM_NC;
|
|
buscfg.sclk_io_num = DISPLAY_CLK_PIN;
|
|
buscfg.quadwp_io_num = GPIO_NUM_NC;
|
|
buscfg.quadhd_io_num = GPIO_NUM_NC;
|
|
buscfg.max_transfer_sz = DISPLAY_WIDTH* DISPLAY_HEIGHT* sizeof(uint16_t);
|
|
ESP_ERROR_CHECK(spi_bus_initialize(DISPLAY_SPI_MODE, &buscfg, SPI_DMA_CH_AUTO));
|
|
}
|
|
|
|
void InitializeButtons() {
|
|
boot_button_.OnClick([this]() {
|
|
auto& app = Application::GetInstance();
|
|
if (app.GetDeviceState() == kDeviceStateStarting) {
|
|
EnterWifiConfigMode();
|
|
return;
|
|
}
|
|
app.ToggleChatState();
|
|
});
|
|
|
|
#if CONFIG_USE_DEVICE_AEC
|
|
boot_button_.OnDoubleClick([this]() {
|
|
auto& app = Application::GetInstance();
|
|
if (app.GetDeviceState() == kDeviceStateIdle) {
|
|
app.SetAecMode(app.GetAecMode() == kAecOff ? kAecOnDeviceSide : kAecOff);
|
|
}
|
|
});
|
|
#endif
|
|
}
|
|
|
|
void InitializeDisplay() {
|
|
esp_lcd_panel_io_handle_t panel_io = nullptr;
|
|
esp_lcd_panel_handle_t panel = nullptr;
|
|
|
|
// 液晶屏控制IO初始化
|
|
ESP_LOGD(TAG, "Install panel IO");
|
|
esp_lcd_panel_io_spi_config_t io_config = {};
|
|
io_config.cs_gpio_num = DISPLAY_CS_PIN;
|
|
io_config.dc_gpio_num = DISPLAY_DC_PIN;
|
|
io_config.spi_mode = 0;
|
|
io_config.pclk_hz = 24 * 1000 * 1000;
|
|
io_config.trans_queue_depth = 10;
|
|
io_config.lcd_cmd_bits = 8;
|
|
io_config.lcd_param_bits = 8;
|
|
ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi(DISPLAY_SPI_MODE, &io_config, &panel_io));
|
|
|
|
// 初始化液晶屏驱动芯片
|
|
ESP_LOGD(TAG, "Install LCD driver");
|
|
esp_lcd_panel_dev_config_t panel_config = {};
|
|
panel_config.reset_gpio_num = DISPLAY_RST_PIN;
|
|
panel_config.rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB;
|
|
panel_config.bits_per_pixel = 16;
|
|
ESP_ERROR_CHECK(esp_lcd_new_panel_st7789(panel_io, &panel_config, &panel));
|
|
esp_lcd_panel_reset(panel);
|
|
esp_lcd_panel_init(panel);
|
|
esp_lcd_panel_invert_color(panel, true);
|
|
// esp_lcd_panel_mirror(panel, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y);
|
|
esp_lcd_panel_disp_on_off(panel, true);
|
|
display_ = new SpiLcdDisplay(panel_io, panel,
|
|
DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_OFFSET_X, DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY);
|
|
}
|
|
|
|
void InitializeTouch() {
|
|
esp_lcd_touch_handle_t tp;
|
|
esp_lcd_touch_config_t tp_cfg = {
|
|
.x_max = DISPLAY_WIDTH - 1,
|
|
.y_max = DISPLAY_HEIGHT - 1,
|
|
.rst_gpio_num = DISPLAY_TOUCH_RST_PIN,
|
|
.int_gpio_num = DISPLAY_TOUCH_INT_PIN,
|
|
.levels = {
|
|
.reset = 0,
|
|
.interrupt = 0,
|
|
},
|
|
.flags = {
|
|
.swap_xy = 0,
|
|
.mirror_x = 0,
|
|
.mirror_y = 0,
|
|
},
|
|
};
|
|
esp_lcd_panel_io_handle_t tp_io_handle = NULL;
|
|
esp_lcd_panel_io_i2c_config_t tp_io_config = ESP_LCD_TOUCH_IO_I2C_CST816S_CONFIG();
|
|
tp_io_config.scl_speed_hz = 400* 1000;
|
|
ESP_ERROR_CHECK(esp_lcd_new_panel_io_i2c(i2c_bus_, &tp_io_config, &tp_io_handle));
|
|
ESP_LOGI(TAG, "Initialize touch controller");
|
|
ESP_ERROR_CHECK(esp_lcd_touch_new_i2c_cst816s(tp_io_handle, &tp_cfg, &tp));
|
|
const lvgl_port_touch_cfg_t touch_cfg = {
|
|
.disp = lv_display_get_default(),
|
|
.handle = tp,
|
|
};
|
|
lvgl_port_add_touch(&touch_cfg);
|
|
ESP_LOGI(TAG, "Touch panel initialized successfully");
|
|
}
|
|
|
|
// 初始化工具
|
|
void InitializeTools() {
|
|
auto &mcp_server = McpServer::GetInstance();
|
|
mcp_server.AddTool("self.system.reconfigure_wifi",
|
|
"Reboot the device and enter WiFi configuration mode.\n"
|
|
"**CAUTION** You must ask the user to confirm this action.",
|
|
PropertyList(), [this](const PropertyList& properties) {
|
|
EnterWifiConfigMode();
|
|
return true;
|
|
});
|
|
}
|
|
|
|
public:
|
|
WaveshareEsp32c6TouchLCD1inch83() : boot_button_(BOOT_BUTTON_GPIO) {
|
|
InitializePowerSaveTimer();
|
|
InitializeCodecI2c();
|
|
InitializeAxp2101();
|
|
InitializeSpi();
|
|
InitializeDisplay();
|
|
InitializeTouch();
|
|
InitializeButtons();
|
|
InitializeTools();
|
|
GetBacklight()->RestoreBrightness();
|
|
}
|
|
|
|
virtual AudioCodec* GetAudioCodec() override {
|
|
static BoxAudioCodec audio_codec(
|
|
i2c_bus_,
|
|
AUDIO_INPUT_SAMPLE_RATE,
|
|
AUDIO_OUTPUT_SAMPLE_RATE,
|
|
AUDIO_I2S_GPIO_MCLK,
|
|
AUDIO_I2S_GPIO_BCLK,
|
|
AUDIO_I2S_GPIO_WS,
|
|
AUDIO_I2S_GPIO_DOUT,
|
|
AUDIO_I2S_GPIO_DIN,
|
|
AUDIO_CODEC_PA_PIN,
|
|
AUDIO_CODEC_ES8311_ADDR,
|
|
AUDIO_CODEC_ES7210_ADDR,
|
|
AUDIO_INPUT_REFERENCE);
|
|
return &audio_codec;
|
|
}
|
|
|
|
virtual Display* GetDisplay() override {
|
|
return display_;
|
|
}
|
|
|
|
virtual Backlight* GetBacklight() override {
|
|
static PwmBacklight backlight(DISPLAY_BACKLIGHT_PIN, DISPLAY_BACKLIGHT_OUTPUT_INVERT);
|
|
return &backlight;
|
|
}
|
|
|
|
virtual bool GetBatteryLevel(int &level, bool &charging, bool &discharging) override {
|
|
static bool last_discharging = false;
|
|
charging = pmic_->IsCharging();
|
|
discharging = pmic_->IsDischarging();
|
|
if (discharging != last_discharging)
|
|
{
|
|
power_save_timer_->SetEnabled(discharging);
|
|
last_discharging = discharging;
|
|
}
|
|
|
|
level = pmic_->GetBatteryLevel();
|
|
return true;
|
|
}
|
|
|
|
virtual void SetPowerSaveLevel(PowerSaveLevel level) override {
|
|
if (level != PowerSaveLevel::LOW_POWER) {
|
|
power_save_timer_->WakeUp();
|
|
}
|
|
WifiBoard::SetPowerSaveLevel(level);
|
|
}
|
|
|
|
};
|
|
|
|
DECLARE_BOARD(WaveshareEsp32c6TouchLCD1inch83);
|