forked from xiaozhi/xiaozhi-esp32
1f803dec16
* 添加DF设备ESP32-S3-K10 添加DFS3设备板子K10 * 完善DFRobot 行空板 K10适配 * Enable K10 RGB LED * Enable K10 SetOutputVolume * 优化K10按键处理 * 添加K10编译配置文件 --------- Co-authored-by: vonweller <154695311+vonweller@users.noreply.github.com>
46 lines
1.2 KiB
C
46 lines
1.2 KiB
C
#ifndef _BOARD_CONFIG_H_
|
|
#define _BOARD_CONFIG_H_
|
|
|
|
#include <driver/gpio.h>
|
|
|
|
#define AUDIO_INPUT_SAMPLE_RATE 24000
|
|
#define AUDIO_OUTPUT_SAMPLE_RATE 24000
|
|
|
|
#define AUDIO_INPUT_REFERENCE true
|
|
|
|
#define AUDIO_I2S_GPIO_MCLK GPIO_NUM_3
|
|
#define AUDIO_I2S_GPIO_WS GPIO_NUM_38
|
|
#define AUDIO_I2S_GPIO_BCLK GPIO_NUM_0
|
|
#define AUDIO_I2S_GPIO_DIN GPIO_NUM_39
|
|
#define AUDIO_I2S_GPIO_DOUT GPIO_NUM_45
|
|
|
|
#define AUDIO_CODEC_PA_PIN GPIO_NUM_NC
|
|
#define AUDIO_CODEC_I2C_SDA_PIN GPIO_NUM_47
|
|
#define AUDIO_CODEC_I2C_SCL_PIN GPIO_NUM_48
|
|
#define AUDIO_CODEC_ES8311_ADDR ES8311_CODEC_DEFAULT_ADDR
|
|
#define AUDIO_CODEC_ES7210_ADDR 0x23
|
|
|
|
#define BUILTIN_LED_GPIO GPIO_NUM_46
|
|
#define BOOT_BUTTON_GPIO GPIO_NUM_0
|
|
#define VOLUME_UP_BUTTON_GPIO GPIO_NUM_NC
|
|
#define VOLUME_DOWN_BUTTON_GPIO GPIO_NUM_NC
|
|
|
|
/* Expander */
|
|
#define DRV_IO_EXP_INPUT_MASK (IO_EXPANDER_PIN_NUM_2 | IO_EXPANDER_PIN_NUM_12)
|
|
|
|
|
|
#define DISPLAY_WIDTH 240
|
|
#define DISPLAY_HEIGHT 320
|
|
#define DISPLAY_MIRROR_X false
|
|
#define DISPLAY_MIRROR_Y true
|
|
#define DISPLAY_SWAP_XY false
|
|
|
|
#define DISPLAY_OFFSET_X 0
|
|
#define DISPLAY_OFFSET_Y 0
|
|
|
|
#define DISPLAY_BACKLIGHT_PIN GPIO_NUM_NC
|
|
#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false
|
|
|
|
|
|
#endif // _BOARD_CONFIG_H_
|