forked from xiaozhi/xiaozhi-esp32
92238612b6
* 修改摄像头配置 * Fix lilygo-t-cameraplus-s3 camera --------- Co-authored-by: yusuhua <yusuhua@baidu.com>
1.4 KiB
1.4 KiB
LILYGO T-CameraPlus-S3
T-CameraPlus-S3 is an intelligent camera module developed based on the ESP32S3 chip, equipped with a 240x240 TFT display, digital microphone, speaker, independent button, power control chip, SD card module, etc. It comes with a basic UI written based on LVGL, which can achieve functions such as file management, music playback, recording, and camera projection (if the factory does not write the program, you need to manually burn the UI program named "Lvgl_UI").
Official github: T-CameraPlus-S3
Configuration
Set the compilation target to ESP32S3
idf.py set-target esp32s3
Open menuconfig
idf.py menuconfig
Select the board
Xiaozhi Assistant -> Board Type -> LILYGO T-CameraPlus-S3_V1_0_V1_1
Or
Xiaozhi Assistant -> Board Type -> LILYGO T-CameraPlus-S3_V1_2
Modify the psram configuration
Component config -> ESP PSRAM -> SPI RAM config -> Mode (QUAD/OCT) -> Quad Mode PSRAM
Select and set camera sensor
Component config -> Espressif Camera Sensors Configurations -> Camera Sensor Configuration -> Select and Set Camera Sensor -> OV2640 -> Select default output format for DVP interface -> YUV422 240x240 25fps, DVP 8-bit, 20M input
Build
idf.py build