forked from xiaozhi/xiaozhi-esp32
1f602fa3a0
* Add support for the Xorigin AiPi Lite * aipi-lite: correction to README_en.md * aipi-lite: use 20MHz display clock Highger speeds might work sometimes but best not to push it and use a sane speed. * aipi-lite: change English name and remove Chinese TTS
1.2 KiB
1.2 KiB
Build Instructions
One-click Build
python scripts/release.py aipi-lite -c config_en.json
Manual Configuration and Build
idf.py set-target esp32s3
Configuration
idf.py menuconfig
Select the board:
Xiaozhi Assistant -> Board Type -> AiPi-Lite
Build and Flash
idf.py -DBOARD_NAME=aipi-lite build flash
Note: If your device was previously shipped with the AiPi-Lite firmware (not the Xiaozhi version), please be very careful with the flash partition addresses to avoid accidentally erasing the device information (such as EUI) of the AiPi-Lite. Otherwise, even if you restore the AiPi-Lite firmware, the device may not be able to connect to the Xorigin server correctly! Therefore, before flashing the firmware, be sure to record the necessary device information to ensure you have a way to recover it!
You can use the following command to back up the factory information:
# Firstly backup the factory information partition which contains the credentials for connecting the SenseCraft server
esptool.py --chip esp32s3 --baud 2000000 --before default_reset --after hard_reset --no-stub read_flash 0x9000 16384 nvsfactory.bin