diff --git a/main/CMakeLists.txt b/main/CMakeLists.txt index f8b7c0e7..371ed23b 100644 --- a/main/CMakeLists.txt +++ b/main/CMakeLists.txt @@ -193,6 +193,8 @@ elseif(CONFIG_BOARD_TYPE_OTTO_ROBOT) set(BOARD_TYPE "otto-robot") elseif(CONFIG_BOARD_TYPE_ELECTRON_BOT) set(BOARD_TYPE "electron-bot") +elseif(CONFIG_BOARD_TYPE_BREAD_COMPACT_WIFI_CAM) + set(BOARD_TYPE "bread-compact-wifi-s3cam") endif() file(GLOB BOARD_SOURCES ${CMAKE_CURRENT_SOURCE_DIR}/boards/${BOARD_TYPE}/*.cc diff --git a/main/Kconfig.projbuild b/main/Kconfig.projbuild index 5768cf71..70f066ae 100644 --- a/main/Kconfig.projbuild +++ b/main/Kconfig.projbuild @@ -34,6 +34,9 @@ choice BOARD_TYPE config BOARD_TYPE_BREAD_COMPACT_WIFI_LCD bool "面包板新版接线（WiFi）+ LCD" depends on IDF_TARGET_ESP32S3 + config BOARD_TYPE_BREAD_COMPACT_WIFI_CAM + bool "面包板新版接线（WiFi）+ LCD + Camera" + depends on IDF_TARGET_ESP32S3 config BOARD_TYPE_BREAD_COMPACT_ML307 bool "面包板新版接线（ML307 AT）" depends on IDF_TARGET_ESP32S3 @@ -295,7 +298,7 @@ choice DISPLAY_OLED_TYPE endchoice choice DISPLAY_LCD_TYPE - depends on BOARD_TYPE_BREAD_COMPACT_WIFI_LCD || BOARD_TYPE_BREAD_COMPACT_ESP32_LCD || BOARD_TYPE_ESP32_CGC || BOARD_TYPE_ESP32P4_NANO || BOARD_TYPE_ESP32P4_WIFI6_Touch_LCD_XC + depends on BOARD_TYPE_BREAD_COMPACT_WIFI_LCD || BOARD_TYPE_BREAD_COMPACT_ESP32_LCD || BOARD_TYPE_ESP32_CGC || BOARD_TYPE_ESP32P4_NANO || BOARD_TYPE_ESP32P4_WIFI6_Touch_LCD_XC || BOARD_TYPE_BREAD_COMPACT_WIFI_CAM prompt "LCD Type" default LCD_ST7789_240X320 help diff --git a/main/boards/bread-compact-wifi-s3cam/README.md b/main/boards/bread-compact-wifi-s3cam/README.md new file mode 100644 index 00000000..9eac5f14 --- /dev/null +++ b/main/boards/bread-compact-wifi-s3cam/README.md @@ -0,0 +1,31 @@ +硬件基于基于ESP32S3CAM开发板，代码基于bread-compact-wifi-lcd修改 +使用的摄像头是OV2640 +注意因为摄像头占用IO较多，所以占用了ESP32S3的USB 19 20两个引脚 +连线方式参考config.h文件中对引脚的定义 + + +# 编译配置命令 + +**配置编译目标为 ESP32S3：** + +```bash +idf.py set-target esp32s3 +``` + +**打开 menuconfig：** + +```bash +idf.py menuconfig +``` + +**选择板子：** + +``` +Xiaozhi Assistant -> Board Type ->面包板新版接线（WiFi）+ LCD + Camera +``` + +**编译烧入：** + +```bash +idf.py build flash +``` \ No newline at end of file diff --git a/main/boards/bread-compact-wifi-s3cam/compact_wifi_board_s3cam.cc b/main/boards/bread-compact-wifi-s3cam/compact_wifi_board_s3cam.cc new file mode 100644 index 00000000..a8435e5f --- /dev/null +++ b/main/boards/bread-compact-wifi-s3cam/compact_wifi_board_s3cam.cc @@ -0,0 +1,240 @@ +#include "wifi_board.h" +#include "audio_codecs/no_audio_codec.h" +#include "display/lcd_display.h" +#include "system_reset.h" +#include "application.h" +#include "button.h" +#include "config.h" +#include "mcp_server.h" +#include "lamp_controller.h" +#include "iot/thing_manager.h" +#include "led/single_led.h" +#include "esp32_camera.h" + +#include +#include +#include +#include +#include +#include +#include + +#if defined(LCD_TYPE_ILI9341_SERIAL) +#include "esp_lcd_ili9341.h" +#endif + +#if defined(LCD_TYPE_GC9A01_SERIAL) +#include "esp_lcd_gc9a01.h" +static const gc9a01_lcd_init_cmd_t gc9107_lcd_init_cmds[] = { + // {cmd, { data }, data_size, delay_ms} + {0xfe, (uint8_t[]){0x00}, 0, 0}, + {0xef, (uint8_t[]){0x00}, 0, 0}, + {0xb0, (uint8_t[]){0xc0}, 1, 0}, + {0xb1, (uint8_t[]){0x80}, 1, 0}, + {0xb2, (uint8_t[]){0x27}, 1, 0}, + {0xb3, (uint8_t[]){0x13}, 1, 0}, + {0xb6, (uint8_t[]){0x19}, 1, 0}, + {0xb7, (uint8_t[]){0x05}, 1, 0}, + {0xac, (uint8_t[]){0xc8}, 1, 0}, + {0xab, (uint8_t[]){0x0f}, 1, 0}, + {0x3a, (uint8_t[]){0x05}, 1, 0}, + {0xb4, (uint8_t[]){0x04}, 1, 0}, + {0xa8, (uint8_t[]){0x08}, 1, 0}, + {0xb8, (uint8_t[]){0x08}, 1, 0}, + {0xea, (uint8_t[]){0x02}, 1, 0}, + {0xe8, (uint8_t[]){0x2A}, 1, 0}, + {0xe9, (uint8_t[]){0x47}, 1, 0}, + {0xe7, (uint8_t[]){0x5f}, 1, 0}, + {0xc6, (uint8_t[]){0x21}, 1, 0}, + {0xc7, (uint8_t[]){0x15}, 1, 0}, + {0xf0, + (uint8_t[]){0x1D, 0x38, 0x09, 0x4D, 0x92, 0x2F, 0x35, 0x52, 0x1E, 0x0C, + 0x04, 0x12, 0x14, 0x1f}, + 14, 0}, + {0xf1, + (uint8_t[]){0x16, 0x40, 0x1C, 0x54, 0xA9, 0x2D, 0x2E, 0x56, 0x10, 0x0D, + 0x0C, 0x1A, 0x14, 0x1E}, + 14, 0}, + {0xf4, (uint8_t[]){0x00, 0x00, 0xFF}, 3, 0}, + {0xba, (uint8_t[]){0xFF, 0xFF}, 2, 0}, +}; +#endif + +#define TAG "CompactWifiBoardS3Cam" + +LV_FONT_DECLARE(font_puhui_16_4); +LV_FONT_DECLARE(font_awesome_16_4); + +class CompactWifiBoardS3Cam : public WifiBoard { +private: + + Button boot_button_; + LcdDisplay* display_; + Esp32Camera* camera_; + + void InitializeSpi() { + spi_bus_config_t buscfg = {}; + buscfg.mosi_io_num = DISPLAY_MOSI_PIN; + buscfg.miso_io_num = GPIO_NUM_NC; + buscfg.sclk_io_num = DISPLAY_CLK_PIN; + buscfg.quadwp_io_num = GPIO_NUM_NC; + buscfg.quadhd_io_num = GPIO_NUM_NC; + buscfg.max_transfer_sz = DISPLAY_WIDTH * DISPLAY_HEIGHT * sizeof(uint16_t); + ESP_ERROR_CHECK(spi_bus_initialize(SPI3_HOST, &buscfg, SPI_DMA_CH_AUTO)); + } + + void InitializeLcdDisplay() { + esp_lcd_panel_io_handle_t panel_io = nullptr; + esp_lcd_panel_handle_t panel = nullptr; + // 液晶屏控制IO初始化 + ESP_LOGD(TAG, "Install panel IO"); + esp_lcd_panel_io_spi_config_t io_config = {}; + io_config.cs_gpio_num = DISPLAY_CS_PIN; + io_config.dc_gpio_num = DISPLAY_DC_PIN; + io_config.spi_mode = DISPLAY_SPI_MODE; + io_config.pclk_hz = 40 * 1000 * 1000; + io_config.trans_queue_depth = 10; + io_config.lcd_cmd_bits = 8; + io_config.lcd_param_bits = 8; + ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi(SPI3_HOST, &io_config, &panel_io)); + + // 初始化液晶屏驱动芯片 + ESP_LOGD(TAG, "Install LCD driver"); + esp_lcd_panel_dev_config_t panel_config = {}; + panel_config.reset_gpio_num = DISPLAY_RST_PIN; + panel_config.rgb_ele_order = DISPLAY_RGB_ORDER; + panel_config.bits_per_pixel = 16; +#if defined(LCD_TYPE_ILI9341_SERIAL) + ESP_ERROR_CHECK(esp_lcd_new_panel_ili9341(panel_io, &panel_config, &panel)); +#elif defined(LCD_TYPE_GC9A01_SERIAL) + ESP_ERROR_CHECK(esp_lcd_new_panel_gc9a01(panel_io, &panel_config, &panel)); + gc9a01_vendor_config_t gc9107_vendor_config = { + .init_cmds = gc9107_lcd_init_cmds, + .init_cmds_size = sizeof(gc9107_lcd_init_cmds) / sizeof(gc9a01_lcd_init_cmd_t), + }; +#else + ESP_ERROR_CHECK(esp_lcd_new_panel_st7789(panel_io, &panel_config, &panel)); +#endif + + esp_lcd_panel_reset(panel); + + + esp_lcd_panel_init(panel); + esp_lcd_panel_invert_color(panel, DISPLAY_INVERT_COLOR); + esp_lcd_panel_swap_xy(panel, DISPLAY_SWAP_XY); + esp_lcd_panel_mirror(panel, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y); +#ifdef LCD_TYPE_GC9A01_SERIAL + panel_config.vendor_config = &gc9107_vendor_config; +#endif + display_ = new SpiLcdDisplay(panel_io, panel, + DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_OFFSET_X, DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY, + { + .text_font = &font_puhui_16_4, + .icon_font = &font_awesome_16_4, +#if CONFIG_USE_WECHAT_MESSAGE_STYLE + .emoji_font = font_emoji_32_init(), +#else + .emoji_font = DISPLAY_HEIGHT >= 240 ? font_emoji_64_init() : font_emoji_32_init(), +#endif + }); + } + + void InitializeCamera() { + camera_config_t config = {}; + config.pin_d0 = CAMERA_PIN_D0; + config.pin_d1 = CAMERA_PIN_D1; + config.pin_d2 = CAMERA_PIN_D2; + config.pin_d3 = CAMERA_PIN_D3; + config.pin_d4 = CAMERA_PIN_D4; + config.pin_d5 = CAMERA_PIN_D5; + config.pin_d6 = CAMERA_PIN_D6; + config.pin_d7 = CAMERA_PIN_D7; + config.pin_xclk = CAMERA_PIN_XCLK; + config.pin_pclk = CAMERA_PIN_PCLK; + config.pin_vsync = CAMERA_PIN_VSYNC; + config.pin_href = CAMERA_PIN_HREF; + config.pin_sccb_sda = CAMERA_PIN_SIOD; + config.pin_sccb_scl = CAMERA_PIN_SIOC; + config.sccb_i2c_port = 0; + config.pin_pwdn = CAMERA_PIN_PWDN; + config.pin_reset = CAMERA_PIN_RESET; + config.xclk_freq_hz = XCLK_FREQ_HZ; + config.pixel_format = PIXFORMAT_RGB565; + config.frame_size = FRAMESIZE_QVGA; + config.jpeg_quality = 12; + config.fb_count = 1; + config.fb_location = CAMERA_FB_IN_PSRAM; + config.grab_mode = CAMERA_GRAB_WHEN_EMPTY; + camera_ = new Esp32Camera(config); + camera_->SetHMirror(false); + } + + void InitializeButtons() { + boot_button_.OnClick([this]() { + auto& app = Application::GetInstance(); + if (app.GetDeviceState() == kDeviceStateStarting && !WifiStation::GetInstance().IsConnected()) { + ResetWifiConfiguration(); + } + app.ToggleChatState(); + }); + } + + // 物联网初始化，添加对 AI 可见设备 + void InitializeIot() { +#if CONFIG_IOT_PROTOCOL_XIAOZHI + auto& thing_manager = iot::ThingManager::GetInstance(); + thing_manager.AddThing(iot::CreateThing("Speaker")); + thing_manager.AddThing(iot::CreateThing("Screen")); +#elif CONFIG_IOT_PROTOCOL_MCP + +#endif + } + +public: + CompactWifiBoardS3Cam() : + boot_button_(BOOT_BUTTON_GPIO) { + InitializeSpi(); + InitializeLcdDisplay(); + InitializeButtons(); + InitializeIot(); + InitializeCamera(); + if (DISPLAY_BACKLIGHT_PIN != GPIO_NUM_NC) { + GetBacklight()->RestoreBrightness(); + } + + } + + virtual Led* GetLed() override { + static SingleLed led(BUILTIN_LED_GPIO); + return &led; + } + + virtual AudioCodec* GetAudioCodec() override { +#ifdef AUDIO_I2S_METHOD_SIMPLEX + static NoAudioCodecSimplex audio_codec(AUDIO_INPUT_SAMPLE_RATE, AUDIO_OUTPUT_SAMPLE_RATE, + AUDIO_I2S_SPK_GPIO_BCLK, AUDIO_I2S_SPK_GPIO_LRCK, AUDIO_I2S_SPK_GPIO_DOUT, AUDIO_I2S_MIC_GPIO_SCK, AUDIO_I2S_MIC_GPIO_WS, AUDIO_I2S_MIC_GPIO_DIN); +#else + static NoAudioCodecDuplex audio_codec(AUDIO_INPUT_SAMPLE_RATE, AUDIO_OUTPUT_SAMPLE_RATE, + AUDIO_I2S_GPIO_BCLK, AUDIO_I2S_GPIO_WS, AUDIO_I2S_GPIO_DOUT, AUDIO_I2S_GPIO_DIN); +#endif + return &audio_codec; + } + + virtual Display* GetDisplay() override { + return display_; + } + + virtual Backlight* GetBacklight() override { + if (DISPLAY_BACKLIGHT_PIN != GPIO_NUM_NC) { + static PwmBacklight backlight(DISPLAY_BACKLIGHT_PIN, DISPLAY_BACKLIGHT_OUTPUT_INVERT); + return &backlight; + } + return nullptr; + } + + virtual Camera* GetCamera() override { + return camera_; + } +}; + +DECLARE_BOARD(CompactWifiBoardS3Cam); diff --git a/main/boards/bread-compact-wifi-s3cam/config.h b/main/boards/bread-compact-wifi-s3cam/config.h new file mode 100644 index 00000000..51e4d0dc --- /dev/null +++ b/main/boards/bread-compact-wifi-s3cam/config.h @@ -0,0 +1,308 @@ +#ifndef _BOARD_CONFIG_H_ +#define _BOARD_CONFIG_H_ + +#include + +#define AUDIO_INPUT_SAMPLE_RATE 16000 +#define AUDIO_OUTPUT_SAMPLE_RATE 24000 + +// 如果使用 Duplex I2S 模式，请注释下面一行 +#define AUDIO_I2S_METHOD_SIMPLEX + +#ifdef AUDIO_I2S_METHOD_SIMPLEX + +#define AUDIO_I2S_MIC_GPIO_WS GPIO_NUM_1 +#define AUDIO_I2S_MIC_GPIO_SCK GPIO_NUM_2 +#define AUDIO_I2S_MIC_GPIO_DIN GPIO_NUM_42 +#define AUDIO_I2S_SPK_GPIO_DOUT GPIO_NUM_39 +#define AUDIO_I2S_SPK_GPIO_BCLK GPIO_NUM_40 +#define AUDIO_I2S_SPK_GPIO_LRCK GPIO_NUM_41 + +#else + +#define AUDIO_I2S_GPIO_WS GPIO_NUM_4 +#define AUDIO_I2S_GPIO_BCLK GPIO_NUM_5 +#define AUDIO_I2S_GPIO_DIN GPIO_NUM_6 +#define AUDIO_I2S_GPIO_DOUT GPIO_NUM_7 + +#endif + + +#define BUILTIN_LED_GPIO GPIO_NUM_48 +#define BOOT_BUTTON_GPIO GPIO_NUM_0 +#define TOUCH_BUTTON_GPIO GPIO_NUM_NC +#define VOLUME_UP_BUTTON_GPIO GPIO_NUM_NC +#define VOLUME_DOWN_BUTTON_GPIO GPIO_NUM_NC + +//Camera Config +#define CAMERA_PIN_D0 GPIO_NUM_11 +#define CAMERA_PIN_D1 GPIO_NUM_9 +#define CAMERA_PIN_D2 GPIO_NUM_8 +#define CAMERA_PIN_D3 GPIO_NUM_10 +#define CAMERA_PIN_D4 GPIO_NUM_12 +#define CAMERA_PIN_D5 GPIO_NUM_18 +#define CAMERA_PIN_D6 GPIO_NUM_17 +#define CAMERA_PIN_D7 GPIO_NUM_16 +#define CAMERA_PIN_XCLK GPIO_NUM_15 +#define CAMERA_PIN_PCLK GPIO_NUM_13 +#define CAMERA_PIN_VSYNC GPIO_NUM_6 +#define CAMERA_PIN_HREF GPIO_NUM_7 +#define CAMERA_PIN_SIOC GPIO_NUM_5 +#define CAMERA_PIN_SIOD GPIO_NUM_4 +#define CAMERA_PIN_PWDN GPIO_NUM_NC +#define CAMERA_PIN_RESET GPIO_NUM_NC +#define XCLK_FREQ_HZ 20000000 + + +#define DISPLAY_BACKLIGHT_PIN GPIO_NUM_38 +#define DISPLAY_MOSI_PIN GPIO_NUM_20 +#define DISPLAY_CLK_PIN GPIO_NUM_19 +#define DISPLAY_DC_PIN GPIO_NUM_47 +#define DISPLAY_RST_PIN GPIO_NUM_21 +#define DISPLAY_CS_PIN GPIO_NUM_45 + + +#ifdef CONFIG_LCD_ST7789_240X320 +#define LCD_TYPE_ST7789_SERIAL +#define DISPLAY_WIDTH 240 +#define DISPLAY_HEIGHT 320 +#define DISPLAY_MIRROR_X false +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR true +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_RGB +#define DISPLAY_OFFSET_X 0 +#define DISPLAY_OFFSET_Y 0 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + +#ifdef CONFIG_LCD_ST7789_240X320_NO_IPS +#define LCD_TYPE_ST7789_SERIAL +#define DISPLAY_WIDTH 240 +#define DISPLAY_HEIGHT 320 +#define DISPLAY_MIRROR_X false +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR false +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_RGB +#define DISPLAY_OFFSET_X 0 +#define DISPLAY_OFFSET_Y 0 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + +#ifdef CONFIG_LCD_ST7789_170X320 +#define LCD_TYPE_ST7789_SERIAL +#define DISPLAY_WIDTH 170 +#define DISPLAY_HEIGHT 320 +#define DISPLAY_MIRROR_X false +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR true +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_RGB +#define DISPLAY_OFFSET_X 35 +#define DISPLAY_OFFSET_Y 0 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + +#ifdef CONFIG_LCD_ST7789_172X320 +#define LCD_TYPE_ST7789_SERIAL +#define DISPLAY_WIDTH 172 +#define DISPLAY_HEIGHT 320 +#define DISPLAY_MIRROR_X false +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR true +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_RGB +#define DISPLAY_OFFSET_X 34 +#define DISPLAY_OFFSET_Y 0 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + +#ifdef CONFIG_LCD_ST7789_240X280 +#define LCD_TYPE_ST7789_SERIAL +#define DISPLAY_WIDTH 240 +#define DISPLAY_HEIGHT 280 +#define DISPLAY_MIRROR_X false +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR true +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_RGB +#define DISPLAY_OFFSET_X 0 +#define DISPLAY_OFFSET_Y 20 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + +#ifdef CONFIG_LCD_ST7789_240X240 +#define LCD_TYPE_ST7789_SERIAL +#define DISPLAY_WIDTH 240 +#define DISPLAY_HEIGHT 240 +#define DISPLAY_MIRROR_X false +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR true +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_RGB +#define DISPLAY_OFFSET_X 0 +#define DISPLAY_OFFSET_Y 0 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + +#ifdef CONFIG_LCD_ST7789_240X240_7PIN +#define LCD_TYPE_ST7789_SERIAL +#define DISPLAY_WIDTH 240 +#define DISPLAY_HEIGHT 240 +#define DISPLAY_MIRROR_X false +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR true +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_RGB +#define DISPLAY_OFFSET_X 0 +#define DISPLAY_OFFSET_Y 0 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 3 +#endif + +#ifdef CONFIG_LCD_ST7789_240X135 +#define LCD_TYPE_ST7789_SERIAL +#define DISPLAY_WIDTH 240 +#define DISPLAY_HEIGHT 135 +#define DISPLAY_MIRROR_X true +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY true +#define DISPLAY_INVERT_COLOR true +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_RGB +#define DISPLAY_OFFSET_X 40 +#define DISPLAY_OFFSET_Y 53 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + +#ifdef CONFIG_LCD_ST7735_128X160 +#define LCD_TYPE_ST7789_SERIAL +#define DISPLAY_WIDTH 128 +#define DISPLAY_HEIGHT 160 +#define DISPLAY_MIRROR_X true +#define DISPLAY_MIRROR_Y true +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR false +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_RGB +#define DISPLAY_OFFSET_X 0 +#define DISPLAY_OFFSET_Y 0 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + +#ifdef CONFIG_LCD_ST7735_128X128 +#define LCD_TYPE_ST7789_SERIAL +#define DISPLAY_WIDTH 128 +#define DISPLAY_HEIGHT 128 +#define DISPLAY_MIRROR_X true +#define DISPLAY_MIRROR_Y true +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR false +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_BGR +#define DISPLAY_OFFSET_X 0 +#define DISPLAY_OFFSET_Y 32 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + +#ifdef CONFIG_LCD_ST7796_320X480 +#define LCD_TYPE_ST7789_SERIAL +#define DISPLAY_WIDTH 320 +#define DISPLAY_HEIGHT 480 +#define DISPLAY_MIRROR_X true +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR true +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_BGR +#define DISPLAY_OFFSET_X 0 +#define DISPLAY_OFFSET_Y 0 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + +#ifdef CONFIG_LCD_ST7796_320X480_NO_IPS +#define LCD_TYPE_ST7789_SERIAL +#define DISPLAY_WIDTH 320 +#define DISPLAY_HEIGHT 480 +#define DISPLAY_MIRROR_X true +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR false +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_BGR +#define DISPLAY_OFFSET_X 0 +#define DISPLAY_OFFSET_Y 0 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + +#ifdef CONFIG_LCD_ILI9341_240X320 +#define LCD_TYPE_ILI9341_SERIAL +#define DISPLAY_WIDTH 240 +#define DISPLAY_HEIGHT 320 +#define DISPLAY_MIRROR_X true +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR true +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_BGR +#define DISPLAY_OFFSET_X 0 +#define DISPLAY_OFFSET_Y 0 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + +#ifdef CONFIG_LCD_ILI9341_240X320_NO_IPS +#define LCD_TYPE_ILI9341_SERIAL +#define DISPLAY_WIDTH 240 +#define DISPLAY_HEIGHT 320 +#define DISPLAY_MIRROR_X true +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR false +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_BGR +#define DISPLAY_OFFSET_X 0 +#define DISPLAY_OFFSET_Y 0 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + +#ifdef CONFIG_LCD_GC9A01_240X240 +#define LCD_TYPE_GC9A01_SERIAL +#define DISPLAY_WIDTH 240 +#define DISPLAY_HEIGHT 240 +#define DISPLAY_MIRROR_X true +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR true +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_BGR +#define DISPLAY_OFFSET_X 0 +#define DISPLAY_OFFSET_Y 0 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + +#ifdef CONFIG_LCD_CUSTOM +#define DISPLAY_WIDTH 240 +#define DISPLAY_HEIGHT 320 +#define DISPLAY_MIRROR_X false +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY false +#define DISPLAY_INVERT_COLOR true +#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_RGB +#define DISPLAY_OFFSET_X 0 +#define DISPLAY_OFFSET_Y 0 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false +#define DISPLAY_SPI_MODE 0 +#endif + + +// A MCP Test: Control a lamp +#define LAMP_GPIO GPIO_NUM_18 + +#endif // _BOARD_CONFIG_H_