增加正点原子两款ESP32S3板子 (#107)

* ESP32S3-BOX
* ESP32S3开发板

main/boards/atk-dnesp32s3-box/atk_dnesp32s3_box.cc

@@ -0,0 +1,129 @@
+#include "wifi_board.h"
+#include "audio_codec.h"
+#include "audio_codecs/no_audio_codec.h"
+#include "display/atk_st7789_80i.h"
+#include "application.h"
+#include "button.h"
+#include "config.h"
+#include "led/single_led.h"
+#include "iot/thing_manager.h"
+#include <wifi_station.h>
+#include <esp_log.h>
+#include <driver/i2c_master.h>
+#include "i2c_device.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "freertos/timers.h"
+
+#define TAG "atk_dnesp32s3_box"
+
+LV_FONT_DECLARE(font_puhui_20_4);
+LV_FONT_DECLARE(font_awesome_20_4);
+
+class XL9555 : public I2cDevice {
+public:
+    XL9555(i2c_master_bus_handle_t i2c_bus, uint8_t addr) : I2cDevice(i2c_bus, addr) {
+        WriteReg(0x06, 0x1B);
+        WriteReg(0x07, 0xFE);
+    }
+
+    void SetOutputState(uint8_t bit, uint8_t level) {
+        uint16_t data;
+        if (bit < 8) {
+            data = ReadReg(0x02);
+        } else {
+            data = ReadReg(0x03);
+            bit -= 8;
+        }
+
+        data = (data & ~(1 << bit)) | (level << bit);
+
+        if (bit < 8) {
+            WriteReg(0x02, data);
+        } else {
+            WriteReg(0x03, data);
+        }
+    }
+};
+
+class atk_dnesp32s3_box : public WifiBoard {
+private:
+    i2c_master_bus_handle_t i2c_bus_;
+    i2c_master_dev_handle_t xl9555_handle_;
+    Button boot_button_;
+    ATK_ST7789_80_Display* display_;
+    XL9555* xl9555_;
+    
+    void InitializeI2c() {
+        // Initialize I2C peripheral
+        i2c_master_bus_config_t i2c_bus_cfg = {
+            .i2c_port = (i2c_port_t)0,
+            .sda_io_num = GPIO_NUM_48,
+            .scl_io_num = GPIO_NUM_45,
+            .clk_source = I2C_CLK_SRC_DEFAULT,
+            .glitch_ignore_cnt = 7,
+            .intr_priority = 0,
+            .trans_queue_depth = 0,
+            .flags = {
+                .enable_internal_pullup = 1,
+            },
+        };
+        ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_cfg, &i2c_bus_));
+
+        // Initialize XL9555
+        xl9555_ = new XL9555(i2c_bus_, 0x20);
+    }
+
+    void InitializeATK_ST7789_80_Display() {
+        display_ = new ATK_ST7789_80_Display(DISPLAY_BACKLIGHT_PIN,DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_OFFSET_X, 
+                                                DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY);
+        xl9555_->SetOutputState(5, 1);
+        xl9555_->SetOutputState(7, 1);
+    }
+
+    void InitializeButtons() {
+        boot_button_.OnClick([this]() {
+            auto& app = Application::GetInstance();
+            if (app.GetDeviceState() == kDeviceStateStarting && !WifiStation::GetInstance().IsConnected())
+            {
+                ResetWifiConfiguration();
+            }
+        });
+        boot_button_.OnPressDown([this]() {
+            Application::GetInstance().StartListening();
+        });
+        boot_button_.OnPressUp([this]() {
+            Application::GetInstance().StopListening();
+        });
+
+        auto codec = GetAudioCodec();
+        GetAudioCodec()->SetOutputVolume(50);
+    }
+
+    // 物联网初始化，添加对 AI 可见设备
+    void InitializeIot() {
+        auto& thing_manager = iot::ThingManager::GetInstance();
+        thing_manager.AddThing(iot::CreateThing("Speaker"));
+        thing_manager.AddThing(iot::CreateThing("Lamp"));
+    }
+
+public:
+    atk_dnesp32s3_box() : boot_button_(BOOT_BUTTON_GPIO) {
+        InitializeI2c();
+        InitializeATK_ST7789_80_Display(); 
+        InitializeButtons();
+        InitializeIot();
+    }
+
+    virtual AudioCodec* GetAudioCodec() override {
+        static ATK_NoAudioCodecDuplex audio_codec(AUDIO_INPUT_SAMPLE_RATE, AUDIO_OUTPUT_SAMPLE_RATE,
+            AUDIO_I2S_GPIO_BCLK, AUDIO_I2S_GPIO_WS, AUDIO_I2S_GPIO_DOUT, AUDIO_I2S_GPIO_DIN);
+        return &audio_codec;
+    }
+    
+    virtual Display* GetDisplay() override {
+        return display_;
+    }
+};
+
+DECLARE_BOARD(atk_dnesp32s3_box);

main/boards/atk-dnesp32s3-box/config.h

@@ -0,0 +1,28 @@
+#ifndef _BOARD_CONFIG_H_
+#define _BOARD_CONFIG_H_
+
+#include <driver/gpio.h>
+
+#define AUDIO_INPUT_SAMPLE_RATE  24000
+#define AUDIO_OUTPUT_SAMPLE_RATE 24000
+
+#define AUDIO_I2S_GPIO_WS GPIO_NUM_13
+#define AUDIO_I2S_GPIO_BCLK GPIO_NUM_21
+#define AUDIO_I2S_GPIO_DIN GPIO_NUM_47
+#define AUDIO_I2S_GPIO_DOUT GPIO_NUM_14
+
+#define BUILTIN_LED_GPIO GPIO_NUM_4
+#define BOOT_BUTTON_GPIO GPIO_NUM_0
+
+#define DISPLAY_OFFSET_X 0
+#define DISPLAY_OFFSET_Y 0
+#define DISPLAY_WIDTH    320
+#define DISPLAY_HEIGHT   240
+#define DISPLAY_SWAP_XY  true
+#define DISPLAY_MIRROR_X true
+#define DISPLAY_MIRROR_Y false
+
+#define DISPLAY_BACKLIGHT_PIN GPIO_NUM_NC
+#define DISPLAY_BACKLIGHT_OUTPUT_INVERT true
+
+#endif // _BOARD_CONFIG_H_