diff --git a/main/CMakeLists.txt b/main/CMakeLists.txt index a9417dda..37846211 100644 --- a/main/CMakeLists.txt +++ b/main/CMakeLists.txt @@ -53,6 +53,8 @@ elseif(CONFIG_BOARD_TYPE_KEVIN_C3) set(BOARD_TYPE "kevin-c3") elseif(CONFIG_BOARD_TYPE_LICHUANG_DEV) set(BOARD_TYPE "lichuang-dev") + elseif(CONFIG_BOARD_TYPE_LICHUANG_C3_DEV) + set(BOARD_TYPE "lichuang-c3-dev") elseif(CONFIG_BOARD_TYPE_MAGICLICK_2P4) set(BOARD_TYPE "magiclick-2p4") elseif(CONFIG_BOARD_TYPE_M5STACK_CORE_S3) diff --git a/main/Kconfig.projbuild b/main/Kconfig.projbuild index 637e4d2c..ba005cbc 100644 --- a/main/Kconfig.projbuild +++ b/main/Kconfig.projbuild @@ -49,7 +49,9 @@ choice BOARD_TYPE config BOARD_TYPE_KEVIN_C3 bool "Kevin C3" config BOARD_TYPE_LICHUANG_DEV - bool "立创开发板" + bool "立创·实战派ESP32-S3开发板" + config BOARD_TYPE_LICHUANG_C3_DEV + bool "立创·实战派ESP32-C3开发板" config BOARD_TYPE_MAGICLICK_2P4 bool "神奇按钮 Magiclick_2.4" config BOARD_TYPE_M5STACK_CORE_S3 diff --git a/main/boards/lichuang-c3-dev/README.md b/main/boards/lichuang-c3-dev/README.md new file mode 100644 index 00000000..e3562ceb --- /dev/null +++ b/main/boards/lichuang-c3-dev/README.md @@ -0,0 +1,11 @@ +## 立创·实战派ESP32-C3开发板 + +1、开发板资料：https://wiki.lckfb.com/zh-hans/szpi-esp32c3 + +2、该开发板 flash 大小为 8MB，编译时注意选择合适的分区表： + +``` +Partition Table ---> + Partition Table (Custom partition table CSV) ---> + (partitions_4M.csv) Custom partition CSV file +``` diff --git a/main/boards/lichuang-c3-dev/config.h b/main/boards/lichuang-c3-dev/config.h new file mode 100644 index 00000000..42af1c58 --- /dev/null +++ b/main/boards/lichuang-c3-dev/config.h @@ -0,0 +1,47 @@ +#ifndef _BOARD_CONFIG_H_ +#define _BOARD_CONFIG_H_ + +#include + +#define AUDIO_INPUT_SAMPLE_RATE 24000 +#define AUDIO_OUTPUT_SAMPLE_RATE 24000 +#define AUDIO_DEFAULT_OUTPUT_VOLUME 80 +#define AUDIO_INPUT_REFERENCE true + +#define AUDIO_I2S_GPIO_MCLK GPIO_NUM_10 +#define AUDIO_I2S_GPIO_WS GPIO_NUM_12 +#define AUDIO_I2S_GPIO_BCLK GPIO_NUM_8 +#define AUDIO_I2S_GPIO_DIN GPIO_NUM_7 +#define AUDIO_I2S_GPIO_DOUT GPIO_NUM_11 + +#define AUDIO_CODEC_USE_PCA9557 +#define AUDIO_CODEC_PA_PIN GPIO_NUM_13 +#define AUDIO_CODEC_I2C_SDA_PIN GPIO_NUM_0 +#define AUDIO_CODEC_I2C_SCL_PIN GPIO_NUM_1 +#define AUDIO_CODEC_ES8311_ADDR ES8311_CODEC_DEFAULT_ADDR +#define AUDIO_CODEC_ES7210_ADDR 0x82 + +#define BUILTIN_LED_GPIO GPIO_NUM_NC +#define BOOT_BUTTON_GPIO GPIO_NUM_9 +#define VOLUME_UP_BUTTON_GPIO GPIO_NUM_NC +#define VOLUME_DOWN_BUTTON_GPIO GPIO_NUM_NC + +#define DISPLAY_SPI_SCK_PIN GPIO_NUM_3 +#define DISPLAY_SPI_MOSI_PIN GPIO_NUM_5 +#define DISPLAY_DC_PIN GPIO_NUM_6 +#define DISPLAY_SPI_CS_PIN GPIO_NUM_4 + +#define DISPLAY_WIDTH 320 +#define DISPLAY_HEIGHT 240 +#define DISPLAY_MIRROR_X true +#define DISPLAY_MIRROR_Y false +#define DISPLAY_SWAP_XY true + +#define DISPLAY_OFFSET_X 0 +#define DISPLAY_OFFSET_Y 0 + +#define DISPLAY_BACKLIGHT_PIN GPIO_NUM_2 +#define DISPLAY_BACKLIGHT_OUTPUT_INVERT true + + +#endif // _BOARD_CONFIG_H_ diff --git a/main/boards/lichuang-c3-dev/lichuang_c3_dev_board.cc b/main/boards/lichuang-c3-dev/lichuang_c3_dev_board.cc new file mode 100644 index 00000000..69ca8231 --- /dev/null +++ b/main/boards/lichuang-c3-dev/lichuang_c3_dev_board.cc @@ -0,0 +1,131 @@ +#include "wifi_board.h" +#include "audio_codecs/es8311_audio_codec.h" +#include "display/lcd_display.h" +#include "application.h" +#include "button.h" +#include "config.h" +#include "i2c_device.h" +#include "iot/thing_manager.h" + +#include +#include +#include +#include +#include + +#define TAG "LichuangC3DevBoard" + +class LichuangC3DevBoard : public WifiBoard { +private: + i2c_master_bus_handle_t codec_i2c_bus_; + Button boot_button_; + LcdDisplay* display_; + + void InitializeI2c() { + // Initialize I2C peripheral + i2c_master_bus_config_t i2c_bus_cfg = { + .i2c_port = I2C_NUM_0, + .sda_io_num = AUDIO_CODEC_I2C_SDA_PIN, + .scl_io_num = AUDIO_CODEC_I2C_SCL_PIN, + .clk_source = I2C_CLK_SRC_DEFAULT, + .glitch_ignore_cnt = 7, + .intr_priority = 0, + .trans_queue_depth = 0, + .flags = { + .enable_internal_pullup = 1, + }, + }; + ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_cfg, &codec_i2c_bus_)); + } + + void InitializeSpi() { + spi_bus_config_t buscfg = {}; + buscfg.mosi_io_num = DISPLAY_SPI_MOSI_PIN; + buscfg.miso_io_num = GPIO_NUM_NC; + buscfg.sclk_io_num = DISPLAY_SPI_SCK_PIN; + buscfg.quadwp_io_num = GPIO_NUM_NC; + buscfg.quadhd_io_num = GPIO_NUM_NC; + buscfg.max_transfer_sz = DISPLAY_WIDTH * DISPLAY_HEIGHT * sizeof(uint16_t); + ESP_ERROR_CHECK(spi_bus_initialize(SPI2_HOST, &buscfg, SPI_DMA_CH_AUTO)); + } + + void InitializeButtons() { + boot_button_.OnClick([this]() { + auto& app = Application::GetInstance(); + if (app.GetDeviceState() == kDeviceStateStarting && !WifiStation::GetInstance().IsConnected()) { + ResetWifiConfiguration(); + } + }); + boot_button_.OnPressDown([this]() { + Application::GetInstance().StartListening(); + }); + boot_button_.OnPressUp([this]() { + Application::GetInstance().StopListening(); + }); + } + + void InitializeSt7789Display() { + esp_lcd_panel_io_handle_t panel_io = nullptr; + esp_lcd_panel_handle_t panel = nullptr; + // 液晶屏控制IO初始化 + ESP_LOGD(TAG, "Install panel IO"); + esp_lcd_panel_io_spi_config_t io_config = {}; + io_config.cs_gpio_num = DISPLAY_SPI_CS_PIN; + io_config.dc_gpio_num = DISPLAY_DC_PIN; + io_config.spi_mode = 2; + io_config.pclk_hz = 80 * 1000 * 1000; + io_config.trans_queue_depth = 10; + io_config.lcd_cmd_bits = 8; + io_config.lcd_param_bits = 8; + ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi(SPI2_HOST, &io_config, &panel_io)); + + // 初始化液晶屏驱动芯片ST7789 + ESP_LOGD(TAG, "Install LCD driver"); + esp_lcd_panel_dev_config_t panel_config = {}; + panel_config.reset_gpio_num = GPIO_NUM_NC; + panel_config.rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB; + panel_config.bits_per_pixel = 16; + ESP_ERROR_CHECK(esp_lcd_new_panel_st7789(panel_io, &panel_config, &panel)); + + esp_lcd_panel_reset(panel); + + esp_lcd_panel_init(panel); + esp_lcd_panel_invert_color(panel, true); + esp_lcd_panel_swap_xy(panel, DISPLAY_SWAP_XY); + esp_lcd_panel_mirror(panel, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y); + display_ = new LcdDisplay(panel_io, panel, DISPLAY_BACKLIGHT_PIN, DISPLAY_BACKLIGHT_OUTPUT_INVERT, + DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_OFFSET_X, DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY); + } + + // 物联网初始化，添加对 AI 可见设备 + void InitializeIot() { + auto& thing_manager = iot::ThingManager::GetInstance(); + thing_manager.AddThing(iot::CreateThing("Speaker")); + } + +public: + LichuangC3DevBoard() : boot_button_(BOOT_BUTTON_GPIO) { + InitializeI2c(); + InitializeSpi(); + InitializeSt7789Display(); + InitializeButtons(); + InitializeIot(); + } + + virtual AudioCodec* GetAudioCodec() override { + static Es8311AudioCodec* audio_codec = nullptr; + if (audio_codec == nullptr) { + audio_codec = new Es8311AudioCodec(codec_i2c_bus_, I2C_NUM_0, AUDIO_INPUT_SAMPLE_RATE, AUDIO_OUTPUT_SAMPLE_RATE, + AUDIO_I2S_GPIO_MCLK, AUDIO_I2S_GPIO_BCLK, AUDIO_I2S_GPIO_WS, AUDIO_I2S_GPIO_DOUT, AUDIO_I2S_GPIO_DIN, + AUDIO_CODEC_PA_PIN, AUDIO_CODEC_ES8311_ADDR); + audio_codec->SetOutputVolume(AUDIO_DEFAULT_OUTPUT_VOLUME); + } + return audio_codec; + } + + virtual Display* GetDisplay() override { + return display_; + } +}; + +DECLARE_BOARD(LichuangC3DevBoard);