forked from xiaozhi/xiaozhi-esp32
在README.md中加入了星智开发板。 修改了星智开发板的分支，对0.96oled、1.54tft屏幕细分了wifi和4g两个版本 (#210)
* Update README.md * Add files via upload * Update README.md * Update README.md * Update README.md * 修改了星智的版级配置，对0.96oled、1.54tft屏幕细分了wifi和4g两个版本 * 修改了星知开发板支持，对0.96oled、1.54tft屏幕都细分了4g和wifi两个版本 --------- Co-authored-by: WMnologo <200~limaohui2016@icloud.com>
This commit is contained in:
WMnologo
40
main/boards/xingzhi-cube-1.54tft-ml307/config.h
Normal file
40
main/boards/xingzhi-cube-1.54tft-ml307/config.h
Normal file
@@ -0,0 +1,40 @@
|
||||
|
||||
#ifndef _BOARD_CONFIG_H_
|
||||
#define _BOARD_CONFIG_H_
|
||||
|
||||
#include <driver/gpio.h>
|
||||
|
||||
#define AUDIO_INPUT_SAMPLE_RATE 16000
|
||||
#define AUDIO_OUTPUT_SAMPLE_RATE 24000
|
||||
|
||||
#define AUDIO_I2S_MIC_GPIO_WS GPIO_NUM_4
|
||||
#define AUDIO_I2S_MIC_GPIO_SCK GPIO_NUM_5
|
||||
#define AUDIO_I2S_MIC_GPIO_DIN GPIO_NUM_6
|
||||
#define AUDIO_I2S_SPK_GPIO_DOUT GPIO_NUM_7
|
||||
#define AUDIO_I2S_SPK_GPIO_BCLK GPIO_NUM_15
|
||||
#define AUDIO_I2S_SPK_GPIO_LRCK GPIO_NUM_16
|
||||
|
||||
#define BOOT_BUTTON_GPIO GPIO_NUM_0
|
||||
#define VOLUME_UP_BUTTON_GPIO GPIO_NUM_40
|
||||
#define VOLUME_DOWN_BUTTON_GPIO GPIO_NUM_39
|
||||
|
||||
#define DISPLAY_SDA GPIO_NUM_10
|
||||
#define DISPLAY_SCL GPIO_NUM_9
|
||||
#define DISPLAY_DC GPIO_NUM_8
|
||||
#define DISPLAY_CS GPIO_NUM_14
|
||||
#define DISPLAY_RES GPIO_NUM_18
|
||||
#define DISPLAY_WIDTH 240
|
||||
#define DISPLAY_HEIGHT 240
|
||||
#define DISPLAY_SWAP_XY false
|
||||
#define DISPLAY_MIRROR_X false
|
||||
#define DISPLAY_MIRROR_Y false
|
||||
#define BACKLIGHT_INVERT false
|
||||
#define DISPLAY_OFFSET_X 0
|
||||
#define DISPLAY_OFFSET_Y 0
|
||||
#define DISPLAY_BACKLIGHT_PIN GPIO_NUM_13
|
||||
#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false
|
||||
|
||||
#define ML307_RX_PIN GPIO_NUM_11
|
||||
#define ML307_TX_PIN GPIO_NUM_12
|
||||
|
||||
#endif // _BOARD_CONFIG_H_
|
||||
9
main/boards/xingzhi-cube-1.54tft-ml307/config.json
Normal file
9
main/boards/xingzhi-cube-1.54tft-ml307/config.json
Normal file
@@ -0,0 +1,9 @@
|
||||
{
|
||||
"target": "esp32s3",
|
||||
"builds": [
|
||||
{
|
||||
"name": "xingzhi-cube-1.54tft-ml307",
|
||||
"sdkconfig_append": []
|
||||
}
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,140 @@
|
||||
#include "ml307_board.h"
|
||||
|
||||
#include "audio_codecs/no_audio_codec.h"
|
||||
#include "display/lcd_display.h"
|
||||
#include "system_reset.h"
|
||||
#include "application.h"
|
||||
#include "button.h"
|
||||
|
||||
#include "config.h"
|
||||
#include "iot/thing_manager.h"
|
||||
#include "led/single_led.h"
|
||||
#include <esp_log.h>
|
||||
#include <esp_lcd_panel_vendor.h>
|
||||
#define TAG "XINGZHI_CUBE_1_54TFT_ML307"
|
||||
|
||||
LV_FONT_DECLARE(font_puhui_16_4);
|
||||
LV_FONT_DECLARE(font_awesome_16_4);
|
||||
|
||||
class XINGZHI_CUBE_1_54TFT_ML307 : public Ml307Board {
|
||||
|
||||
private:
|
||||
Button boot_button_;
|
||||
Button volume_up_button_;
|
||||
Button volume_down_button_;
|
||||
LcdDisplay* display_;
|
||||
|
||||
void InitializeSpi() {
|
||||
spi_bus_config_t buscfg = {};
|
||||
buscfg.mosi_io_num = DISPLAY_SDA;
|
||||
buscfg.miso_io_num = GPIO_NUM_NC;
|
||||
buscfg.sclk_io_num = DISPLAY_SCL;
|
||||
buscfg.quadwp_io_num = GPIO_NUM_NC;
|
||||
buscfg.quadhd_io_num = GPIO_NUM_NC;
|
||||
buscfg.max_transfer_sz = DISPLAY_WIDTH * DISPLAY_HEIGHT * sizeof(uint16_t);
|
||||
ESP_ERROR_CHECK(spi_bus_initialize(SPI3_HOST, &buscfg, SPI_DMA_CH_AUTO));
|
||||
}
|
||||
|
||||
void InitializeButtons() {
|
||||
boot_button_.OnClick([this]() {
|
||||
auto& app = Application::GetInstance();
|
||||
app.ToggleChatState();
|
||||
});
|
||||
|
||||
volume_up_button_.OnClick([this]() {
|
||||
auto codec = GetAudioCodec();
|
||||
auto volume = codec->output_volume() + 10;
|
||||
if (volume > 100) {
|
||||
volume = 100;
|
||||
}
|
||||
codec->SetOutputVolume(volume);
|
||||
GetDisplay()->ShowNotification("音量 " + std::to_string(volume));
|
||||
});
|
||||
|
||||
volume_up_button_.OnLongPress([this]() {
|
||||
GetAudioCodec()->SetOutputVolume(100);
|
||||
GetDisplay()->ShowNotification("最大音量");
|
||||
});
|
||||
|
||||
volume_down_button_.OnClick([this]() {
|
||||
auto codec = GetAudioCodec();
|
||||
auto volume = codec->output_volume() - 10;
|
||||
if (volume < 0) {
|
||||
volume = 0;
|
||||
}
|
||||
codec->SetOutputVolume(volume);
|
||||
GetDisplay()->ShowNotification("音量 " + std::to_string(volume));
|
||||
});
|
||||
|
||||
volume_down_button_.OnLongPress([this]() {
|
||||
GetAudioCodec()->SetOutputVolume(0);
|
||||
GetDisplay()->ShowNotification("已静音");
|
||||
});
|
||||
}
|
||||
|
||||
void InitializeSt7789Display() {
|
||||
esp_lcd_panel_io_handle_t panel_io = nullptr;
|
||||
esp_lcd_panel_handle_t panel = nullptr;
|
||||
|
||||
ESP_LOGD(TAG, "Install panel IO");
|
||||
esp_lcd_panel_io_spi_config_t io_config = {};
|
||||
io_config.cs_gpio_num = DISPLAY_CS;
|
||||
io_config.dc_gpio_num = DISPLAY_DC;
|
||||
io_config.spi_mode = 3;
|
||||
io_config.pclk_hz = 80 * 1000 * 1000;
|
||||
io_config.trans_queue_depth = 10;
|
||||
io_config.lcd_cmd_bits = 8;
|
||||
io_config.lcd_param_bits = 8;
|
||||
ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi(SPI3_HOST, &io_config, &panel_io));
|
||||
|
||||
ESP_LOGD(TAG, "Install LCD driver");
|
||||
esp_lcd_panel_dev_config_t panel_config = {};
|
||||
panel_config.reset_gpio_num = DISPLAY_RES;
|
||||
panel_config.rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB;
|
||||
panel_config.bits_per_pixel = 16;
|
||||
ESP_ERROR_CHECK(esp_lcd_new_panel_st7789(panel_io, &panel_config, &panel));
|
||||
ESP_ERROR_CHECK(esp_lcd_panel_reset(panel));
|
||||
ESP_ERROR_CHECK(esp_lcd_panel_init(panel));
|
||||
ESP_ERROR_CHECK(esp_lcd_panel_swap_xy(panel, DISPLAY_SWAP_XY));
|
||||
ESP_ERROR_CHECK(esp_lcd_panel_mirror(panel, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y));
|
||||
ESP_ERROR_CHECK(esp_lcd_panel_invert_color(panel, true));
|
||||
|
||||
display_ = new LcdDisplay(panel_io, panel, DISPLAY_BACKLIGHT_PIN, DISPLAY_BACKLIGHT_OUTPUT_INVERT,
|
||||
DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_OFFSET_X, DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY,
|
||||
{
|
||||
.text_font = &font_puhui_16_4,
|
||||
.icon_font = &font_awesome_16_4,
|
||||
.emoji_font = DISPLAY_HEIGHT >= 240 ? font_emoji_64_init() : font_emoji_32_init(),
|
||||
});
|
||||
}
|
||||
|
||||
void InitializeIot() {
|
||||
auto& thing_manager = iot::ThingManager::GetInstance();
|
||||
thing_manager.AddThing(iot::CreateThing("Speaker"));
|
||||
thing_manager.AddThing(iot::CreateThing("Backlight"));
|
||||
}
|
||||
|
||||
public:
|
||||
XINGZHI_CUBE_1_54TFT_ML307() :
|
||||
Ml307Board(ML307_TX_PIN, ML307_RX_PIN, 4096),
|
||||
boot_button_(BOOT_BUTTON_GPIO),
|
||||
volume_up_button_(VOLUME_UP_BUTTON_GPIO),
|
||||
volume_down_button_(VOLUME_DOWN_BUTTON_GPIO) {
|
||||
InitializeSpi();
|
||||
InitializeButtons();
|
||||
InitializeSt7789Display();
|
||||
InitializeIot();
|
||||
}
|
||||
|
||||
virtual AudioCodec* GetAudioCodec() override {
|
||||
static NoAudioCodecSimplex audio_codec(AUDIO_INPUT_SAMPLE_RATE, AUDIO_OUTPUT_SAMPLE_RATE,
|
||||
AUDIO_I2S_SPK_GPIO_BCLK, AUDIO_I2S_SPK_GPIO_LRCK, AUDIO_I2S_SPK_GPIO_DOUT, AUDIO_I2S_MIC_GPIO_SCK, AUDIO_I2S_MIC_GPIO_WS, AUDIO_I2S_MIC_GPIO_DIN);
|
||||
return &audio_codec;
|
||||
}
|
||||
|
||||
virtual Display *GetDisplay() override {
|
||||
return display_;
|
||||
}
|
||||
};
|
||||
|
||||
DECLARE_BOARD(XINGZHI_CUBE_1_54TFT_ML307);
|
||||
Reference in New Issue
Block a user