添加小智云聊-S3并修改8388支持AEC (#1179)

main/boards/yunliao-s3/config.h

@@ -0,0 +1,59 @@
+#ifndef _BOARD_CONFIG_H_
+#define _BOARD_CONFIG_H_
+
+#include <driver/gpio.h>
+
+#define AUDIO_INPUT_REFERENCE       true
+
+#define AUDIO_INPUT_SAMPLE_RATE     24000
+#define AUDIO_OUTPUT_SAMPLE_RATE    24000
+#define AUDIO_DEFAULT_OUTPUT_VOLUME 70
+
+#define AUDIO_I2S_GPIO_MCLK GPIO_NUM_14
+#define AUDIO_I2S_GPIO_BCLK GPIO_NUM_13
+#define AUDIO_I2S_GPIO_WS   GPIO_NUM_11
+#define AUDIO_I2S_GPIO_DOUT GPIO_NUM_12
+#define AUDIO_I2S_GPIO_DIN  GPIO_NUM_10
+
+#define AUDIO_CODEC_PA_PIN       GPIO_NUM_17
+#define AUDIO_CODEC_I2C_SCL_PIN  GPIO_NUM_21
+#define AUDIO_CODEC_I2C_SDA_PIN  GPIO_NUM_18
+#define AUDIO_CODEC_ES8388_ADDR ES8388_CODEC_DEFAULT_ADDR
+
+#define BOOT_BUTTON_PIN         GPIO_NUM_2
+#define BOOT_5V_PIN             GPIO_NUM_3      //5V升压输出
+#define BOOT_4G_PIN             GPIO_NUM_5      //4G模块使能
+#define MON_BATT_PIN            GPIO_NUM_43    	//检测PMU电池指示
+#define MON_BATT_CNT            70    	        //检测PMU电池秒数
+#define MON_USB_PIN				GPIO_NUM_47    	//检测USB插入
+
+
+#define ML307_RX_PIN            GPIO_NUM_16
+#define ML307_TX_PIN            GPIO_NUM_15
+
+#define DISPLAY_SPI_LCD_HOST    SPI2_HOST
+#define DISPLAY_SPI_CLOCK_HZ    (40 * 1000 * 1000)
+#define DISPLAY_SPI_PIN_SCLK    42
+#define DISPLAY_SPI_PIN_MOSI    40
+#define DISPLAY_SPI_PIN_MISO    -1
+#define DISPLAY_SPI_PIN_LCD_DC  41
+#define DISPLAY_SPI_PIN_LCD_RST 45
+#define DISPLAY_SPI_PIN_LCD_CS  -1
+#define DISPLAY_PIN_TOUCH_CS    -1
+
+#define DISPLAY_BACKLIGHT_PIN   GPIO_NUM_46
+#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false
+
+#define DISPLAY_WIDTH   320
+#define DISPLAY_HEIGHT  240
+#define DISPLAY_SWAP_XY true
+#define DISPLAY_MIRROR_X false
+#define DISPLAY_MIRROR_Y true
+#define DISPLAY_INVERT_COLOR false
+#define DISPLAY_RGB_ORDER_COLOR LCD_RGB_ELEMENT_ORDER_RGB
+
+#define DISPLAY_OFFSET_X  0
+#define DISPLAY_OFFSET_Y  0
+#define KEY_EXPIRE_MS   800
+
+#endif // _BOARD_CONFIG_H_