diff --git a/main/CMakeLists.txt b/main/CMakeLists.txt
index ea8eb6e2..d0a4a14a 100644
--- a/main/CMakeLists.txt
+++ b/main/CMakeLists.txt
@@ -85,6 +85,8 @@ elseif(CONFIG_BOARD_TYPE_ATK_DNESP32S3)
     set(BOARD_TYPE "atk-dnesp32s3")
 elseif(CONFIG_BOARD_TYPE_ATK_DNESP32S3_BOX)
     set(BOARD_TYPE "atk-dnesp32s3-box") 
+elseif(CONFIG_BOARD_TYPE_DU_CHATX)
+    set(BOARD_TYPE "du-chatx")     
 endif()
 file(GLOB BOARD_SOURCES ${CMAKE_CURRENT_SOURCE_DIR}/boards/${BOARD_TYPE}/*.cc)
 list(APPEND SOURCES ${BOARD_SOURCES})
diff --git a/main/Kconfig.projbuild b/main/Kconfig.projbuild
index 7889dc4e..bb05789a 100644
--- a/main/Kconfig.projbuild
+++ b/main/Kconfig.projbuild
@@ -84,6 +84,8 @@ choice BOARD_TYPE
         bool "正点原子DNESP32S3开发板"
     config BOARD_TYPE_ATK_DNESP32S3_BOX
         bool "正点原子DNESP32S3-BOX"
+    config BOARD_TYPE_DU_CHATX
+        bool "嘟嘟开发板CHATX(wifi)"       
 endchoice
 
 choice DISPLAY_LCD_TYPE
diff --git a/main/boards/du-chatx/config.h b/main/boards/du-chatx/config.h
new file mode 100644
index 00000000..941495b3
--- /dev/null
+++ b/main/boards/du-chatx/config.h
@@ -0,0 +1,54 @@
+#ifndef _BOARD_CONFIG_H_
+#define _BOARD_CONFIG_H_
+
+#include <driver/gpio.h>
+
+#define AUDIO_INPUT_SAMPLE_RATE 16000
+#define AUDIO_OUTPUT_SAMPLE_RATE 24000
+
+// 如果使用 Duplex I2S 模式，请注释下面一行
+#define AUDIO_I2S_METHOD_SIMPLEX
+
+#ifdef AUDIO_I2S_METHOD_SIMPLEX
+
+#define AUDIO_I2S_MIC_GPIO_WS GPIO_NUM_39
+#define AUDIO_I2S_MIC_GPIO_SCK GPIO_NUM_38
+#define AUDIO_I2S_MIC_GPIO_DIN GPIO_NUM_7
+#define AUDIO_I2S_SPK_GPIO_DOUT GPIO_NUM_40
+#define AUDIO_I2S_SPK_GPIO_BCLK GPIO_NUM_42
+#define AUDIO_I2S_SPK_GPIO_LRCK GPIO_NUM_2
+
+#else
+
+#define AUDIO_I2S_GPIO_WS GPIO_NUM_4
+#define AUDIO_I2S_GPIO_BCLK GPIO_NUM_5
+#define AUDIO_I2S_GPIO_DIN GPIO_NUM_6
+#define AUDIO_I2S_GPIO_DOUT GPIO_NUM_7
+
+#endif
+
+#define BUILTIN_LED_GPIO GPIO_NUM_48
+#define BOOT_BUTTON_GPIO GPIO_NUM_0
+#define TOUCH_BUTTON_GPIO GPIO_NUM_NC
+#define VOLUME_UP_BUTTON_GPIO GPIO_NUM_NC
+#define VOLUME_DOWN_BUTTON_GPIO GPIO_NUM_NC
+
+#define DISPLAY_BACKLIGHT_PIN GPIO_NUM_9
+#define DISPLAY_MOSI_PIN GPIO_NUM_18
+#define DISPLAY_CLK_PIN GPIO_NUM_17
+#define DISPLAY_DC_PIN GPIO_NUM_8
+#define DISPLAY_RST_PIN GPIO_NUM_20
+#define DISPLAY_CS_PIN GPIO_NUM_16
+
+#define DISPLAY_WIDTH 128
+#define DISPLAY_HEIGHT 160
+#define DISPLAY_MIRROR_X true
+#define DISPLAY_MIRROR_Y true
+#define DISPLAY_SWAP_XY false
+#define DISPLAY_INVERT_COLOR false
+#define DISPLAY_RGB_ORDER LCD_RGB_ELEMENT_ORDER_RGB
+#define DISPLAY_OFFSET_X 0
+#define DISPLAY_OFFSET_Y 0
+#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false
+
+#endif // _BOARD_CONFIG_H_
diff --git a/main/boards/du-chatx/du-chatx-wifi.cc b/main/boards/du-chatx/du-chatx-wifi.cc
new file mode 100644
index 00000000..854b5f7d
--- /dev/null
+++ b/main/boards/du-chatx/du-chatx-wifi.cc
@@ -0,0 +1,134 @@
+#include "wifi_board.h"
+#include "audio_codecs/no_audio_codec.h"
+#include "display/lcd_display.h"
+#include "system_reset.h"
+#include "application.h"
+#include "button.h"
+#include "config.h"
+#include "iot/thing_manager.h"
+#include "led/single_led.h"
+
+#include <wifi_station.h>
+#include <esp_log.h>
+#include <driver/i2c_master.h>
+#include <esp_lcd_panel_vendor.h>
+#include <driver/spi_common.h>
+
+#if defined(LCD_ILI9341_240X320) || defined(LCD_ILI9341_240X320_NO_IPS)
+#include "esp_lcd_ili9341.h"
+#endif
+ 
+#define TAG "DuChatX"
+
+LV_FONT_DECLARE(font_puhui_16_4);
+LV_FONT_DECLARE(font_awesome_16_4);
+
+class DuChatX : public WifiBoard {
+private:
+ 
+    Button boot_button_;
+    LcdDisplay* display_;
+
+    void InitializeSpi() {
+        spi_bus_config_t buscfg = {};
+        buscfg.mosi_io_num = DISPLAY_MOSI_PIN;
+        buscfg.miso_io_num = GPIO_NUM_NC;
+        buscfg.sclk_io_num = DISPLAY_CLK_PIN;
+        buscfg.quadwp_io_num = GPIO_NUM_NC;
+        buscfg.quadhd_io_num = GPIO_NUM_NC;
+        buscfg.max_transfer_sz = DISPLAY_WIDTH * DISPLAY_HEIGHT * sizeof(uint16_t);
+        ESP_ERROR_CHECK(spi_bus_initialize(SPI3_HOST, &buscfg, SPI_DMA_CH_AUTO));
+    }
+
+    void InitializeLcdDisplay() {
+        esp_lcd_panel_io_handle_t panel_io = nullptr;
+        esp_lcd_panel_handle_t panel = nullptr;
+        // 液晶屏控制IO初始化
+        ESP_LOGD(TAG, "Install panel IO");
+        esp_lcd_panel_io_spi_config_t io_config = {};
+        io_config.cs_gpio_num = DISPLAY_CS_PIN;
+        io_config.dc_gpio_num = DISPLAY_DC_PIN;
+        io_config.spi_mode = 0;
+        io_config.pclk_hz = 40 * 1000 * 1000;
+        io_config.trans_queue_depth = 10;
+        io_config.lcd_cmd_bits = 8;
+        io_config.lcd_param_bits = 8;
+        ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi(SPI3_HOST, &io_config, &panel_io));
+
+        // 初始化液晶屏驱动芯片
+        ESP_LOGD(TAG, "Install LCD driver");
+        esp_lcd_panel_dev_config_t panel_config = {};
+        panel_config.reset_gpio_num = DISPLAY_RST_PIN;
+        panel_config.rgb_ele_order = DISPLAY_RGB_ORDER;
+        panel_config.bits_per_pixel = 16;
+#if defined(LCD_ILI9341_240X320) || defined(LCD_ILI9341_240X320_NO_IPS)
+        ESP_ERROR_CHECK(esp_lcd_new_panel_ili9341(panel_io, &panel_config, &panel));
+#else
+        ESP_ERROR_CHECK(esp_lcd_new_panel_st7789(panel_io, &panel_config, &panel));
+#endif
+        
+        esp_lcd_panel_reset(panel);
+ 
+
+        esp_lcd_panel_init(panel);
+        esp_lcd_panel_invert_color(panel, DISPLAY_INVERT_COLOR);
+        esp_lcd_panel_swap_xy(panel, DISPLAY_SWAP_XY);
+        esp_lcd_panel_mirror(panel, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y);
+        display_ = new LcdDisplay(panel_io, panel, DISPLAY_BACKLIGHT_PIN, DISPLAY_BACKLIGHT_OUTPUT_INVERT,
+                                    DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_OFFSET_X, DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY,
+                                    {
+                                        .text_font = &font_puhui_16_4,
+                                        .icon_font = &font_awesome_16_4,
+                                        .emoji_font = DISPLAY_HEIGHT >= 240 ? font_emoji_64_init() : font_emoji_32_init(),
+                                    });
+    }
+
+
+ 
+    void InitializeButtons() {
+        boot_button_.OnClick([this]() {
+            auto& app = Application::GetInstance();
+            if (app.GetDeviceState() == kDeviceStateStarting && !WifiStation::GetInstance().IsConnected()) {
+                ResetWifiConfiguration();
+            }
+            app.ToggleChatState();
+        });
+    }
+
+    // 物联网初始化，添加对 AI 可见设备
+    void InitializeIot() {
+        auto& thing_manager = iot::ThingManager::GetInstance();
+        thing_manager.AddThing(iot::CreateThing("Speaker"));
+    }
+
+public:
+    DuChatX() :
+        boot_button_(BOOT_BUTTON_GPIO) {
+        InitializeSpi();
+        InitializeLcdDisplay();
+        InitializeButtons();
+        InitializeIot();
+    }
+
+    virtual Led* GetLed() override {
+        static SingleLed led(BUILTIN_LED_GPIO);
+        return &led;
+    }
+
+    virtual AudioCodec* GetAudioCodec() override {
+#ifdef AUDIO_I2S_METHOD_SIMPLEX
+        static NoAudioCodecSimplex audio_codec(AUDIO_INPUT_SAMPLE_RATE, AUDIO_OUTPUT_SAMPLE_RATE,
+            AUDIO_I2S_SPK_GPIO_BCLK, AUDIO_I2S_SPK_GPIO_LRCK, AUDIO_I2S_SPK_GPIO_DOUT, AUDIO_I2S_MIC_GPIO_SCK, AUDIO_I2S_MIC_GPIO_WS, AUDIO_I2S_MIC_GPIO_DIN);
+#else
+        static NoAudioCodecDuplex audio_codec(AUDIO_INPUT_SAMPLE_RATE, AUDIO_OUTPUT_SAMPLE_RATE,
+            AUDIO_I2S_GPIO_BCLK, AUDIO_I2S_GPIO_WS, AUDIO_I2S_GPIO_DOUT, AUDIO_I2S_GPIO_DIN);
+#endif
+        return &audio_codec;
+    }
+
+    virtual Display* GetDisplay() override {
+        return display_;
+    }
+};
+
+DECLARE_BOARD(DuChatX);