devttl/xiaozhi-esp32
1
0
Fork 0
forked from xiaozhi/xiaozhi-esp32
Code Pull Requests Activity

1.4.3: Low power popup & replace OledDisplay with Ssd1306Display

Browse Source
This commit is contained in:
Terrence
2025-03-06 05:22:06 +08:00
parent 40be60ff9b
commit 20696b37f9
33 changed files with 1006 additions and 839 deletions
Download Patch File Download Diff File Expand all files Collapse all files

59
main/boards/tudouzi/axp2101.cc
View File

@@ -1,59 +0,0 @@
#include "axp2101.h"
#include "board.h"
#include "display.h"
#include <esp_log.h>
#define TAG "Axp2101"
Axp2101::Axp2101(i2c_master_bus_handle_t i2c_bus, uint8_t addr) : I2cDevice(i2c_bus, addr) {
// ** EFUSE defaults **
WriteReg(0x22, 0b110); // PWRON > OFFLEVEL as POWEROFF Source enable
WriteReg(0x27, 0x10); // hold 4s to power off
WriteReg(0x93, 0x1C); // 配置 aldo2 输出为 3.3V
uint8_t value = ReadReg(0x90); // XPOWERS_AXP2101_LDO_ONOFF_CTRL0
value = value | 0x02; // set bit 1 (ALDO2)
WriteReg(0x90, value); // and power channels now enabled
WriteReg(0x64, 0x03); // CV charger voltage setting to 4.2V
WriteReg(0x61, 0x05); // set Main battery precharge current to 125mA
WriteReg(0x62, 0x0A); // set Main battery charger current to 400mA ( 0x08-200mA, 0x09-300mA, 0x0A-400mA )
WriteReg(0x63, 0x15); // set Main battery term charge current to 125mA
WriteReg(0x14, 0x00); // set minimum system voltage to 4.1V (default 4.7V), for poor USB cables
WriteReg(0x15, 0x00); // set input voltage limit to 3.88v, for poor USB cables
WriteReg(0x16, 0x05); // set input current limit to 2000mA
WriteReg(0x24, 0x01); // set Vsys for PWROFF threshold to 3.2V (default - 2.6V and kill battery)
WriteReg(0x50, 0x14); // set TS pin to EXTERNAL input (not temperature)
}
int Axp2101::GetBatteryCurrentDirection() {
return (ReadReg(0x01) & 0b01100000) >> 5;
}
bool Axp2101::IsCharging() {
return GetBatteryCurrentDirection() == 1;
}
bool Axp2101::IsDischarging() {
return GetBatteryCurrentDirection() == 2;
}
bool Axp2101::IsChargingDone() {
uint8_t value = ReadReg(0x01);
return (value & 0b00000111) == 0b00000100;
}
int Axp2101::GetBatteryLevel() {
return ReadReg(0xA4);
}
void Axp2101::PowerOff() {
uint8_t value = ReadReg(0x10);
value = value | 0x01;
WriteReg(0x10, value);
}

19
main/boards/tudouzi/axp2101.h
View File

@@ -1,19 +0,0 @@
#ifndef __AXP2101_H__
#define __AXP2101_H__
#include "i2c_device.h"
class Axp2101 : public I2cDevice {
public:
Axp2101(i2c_master_bus_handle_t i2c_bus, uint8_t addr);
bool IsCharging();
bool IsDischarging();
bool IsChargingDone();
int GetBatteryLevel();
void PowerOff();
private:
int GetBatteryCurrentDirection();
};
#endif

119
main/boards/tudouzi/kevin_box_board.cc
View File

@@ -1,6 +1,6 @@
#include "ml307_board.h"
#include "audio_codecs/box_audio_codec.h"
#include "display/ssd1306_display.h"
#include "display/oled_display.h"
#include "application.h"
#include "button.h"
#include "led/single_led.h"
@@ -14,17 +14,52 @@
#include <esp_log.h>
#include <driver/gpio.h>
#include <driver/i2c_master.h>
#include <esp_lcd_panel_ops.h>
#include <esp_lcd_panel_vendor.h>
#define TAG "KevinBoxBoard"
LV_FONT_DECLARE(font_puhui_14_1);
LV_FONT_DECLARE(font_awesome_14_1);
class Pmic : public Axp2101 {
public:
Pmic(i2c_master_bus_handle_t i2c_bus, uint8_t addr) : Axp2101(i2c_bus, addr) {
// ** EFUSE defaults **
WriteReg(0x22, 0b110); // PWRON > OFFLEVEL as POWEROFF Source enable
WriteReg(0x27, 0x10); // hold 4s to power off
WriteReg(0x93, 0x1C); // 配置 aldo2 输出为 3.3V
uint8_t value = ReadReg(0x90); // XPOWERS_AXP2101_LDO_ONOFF_CTRL0
value = value | 0x02; // set bit 1 (ALDO2)
WriteReg(0x90, value); // and power channels now enabled
WriteReg(0x64, 0x03); // CV charger voltage setting to 4.2V
WriteReg(0x61, 0x05); // set Main battery precharge current to 125mA
WriteReg(0x62, 0x0A); // set Main battery charger current to 400mA ( 0x08-200mA, 0x09-300mA, 0x0A-400mA )
WriteReg(0x63, 0x15); // set Main battery term charge current to 125mA
WriteReg(0x14, 0x00); // set minimum system voltage to 4.1V (default 4.7V), for poor USB cables
WriteReg(0x15, 0x00); // set input voltage limit to 3.88v, for poor USB cables
WriteReg(0x16, 0x05); // set input current limit to 2000mA
WriteReg(0x24, 0x01); // set Vsys for PWROFF threshold to 3.2V (default - 2.6V and kill battery)
WriteReg(0x50, 0x14); // set TS pin to EXTERNAL input (not temperature)
}
};
class KevinBoxBoard : public Ml307Board {
private:
i2c_master_bus_handle_t display_i2c_bus_;
i2c_master_bus_handle_t codec_i2c_bus_;
Axp2101* axp2101_ = nullptr;
esp_lcd_panel_io_handle_t panel_io_ = nullptr;
esp_lcd_panel_handle_t panel_ = nullptr;
OledDisplay* display_ = nullptr;
Pmic* pmic_ = nullptr;
Button boot_button_;
Button volume_up_button_;
Button volume_down_button_;
@@ -85,6 +120,53 @@ private:
ESP_ERROR_CHECK(i2c_new_master_bus(&bus_config, &display_i2c_bus_));
}
void InitializeSsd1306Display() {
// SSD1306 config
esp_lcd_panel_io_i2c_config_t io_config = {
.dev_addr = 0x3C,
.on_color_trans_done = nullptr,
.user_ctx = nullptr,
.control_phase_bytes = 1,
.dc_bit_offset = 6,
.lcd_cmd_bits = 8,
.lcd_param_bits = 8,
.flags = {
.dc_low_on_data = 0,
.disable_control_phase = 0,
},
.scl_speed_hz = 400 * 1000,
};
ESP_ERROR_CHECK(esp_lcd_new_panel_io_i2c_v2(display_i2c_bus_, &io_config, &panel_io_));
ESP_LOGI(TAG, "Install SSD1306 driver");
esp_lcd_panel_dev_config_t panel_config = {};
panel_config.reset_gpio_num = -1;
panel_config.bits_per_pixel = 1;
esp_lcd_panel_ssd1306_config_t ssd1306_config = {
.height = static_cast<uint8_t>(DISPLAY_HEIGHT),
};
panel_config.vendor_config = &ssd1306_config;
ESP_ERROR_CHECK(esp_lcd_new_panel_ssd1306(panel_io_, &panel_config, &panel_));
ESP_LOGI(TAG, "SSD1306 driver installed");
// Reset the display
ESP_ERROR_CHECK(esp_lcd_panel_reset(panel_));
if (esp_lcd_panel_init(panel_) != ESP_OK) {
ESP_LOGE(TAG, "Failed to initialize display");
return;
}
// Set the display to on
ESP_LOGI(TAG, "Turning display on");
ESP_ERROR_CHECK(esp_lcd_panel_disp_on_off(panel_, true));
display_ = new OledDisplay(panel_io_, panel_, DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y,
{&font_puhui_14_1, &font_awesome_14_1});
}
void InitializeCodecI2c() {
// Initialize I2C peripheral
i2c_master_bus_config_t i2c_bus_cfg = {
@@ -159,8 +241,9 @@ public:
volume_up_button_(VOLUME_UP_BUTTON_GPIO),
volume_down_button_(VOLUME_DOWN_BUTTON_GPIO) {
InitializeDisplayI2c();
InitializeSsd1306Display();
InitializeCodecI2c();
axp2101_ = new Axp2101(codec_i2c_bus_, AXP2101_I2C_ADDR);
pmic_ = new Pmic(codec_i2c_bus_, AXP2101_I2C_ADDR);
Enable4GModule();
@@ -182,42 +265,22 @@ public:
}
virtual Display* GetDisplay() override {
static Ssd1306Display display(display_i2c_bus_, DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y,
&font_puhui_14_1, &font_awesome_14_1);
return &display;
return display_;
}
virtual bool GetBatteryLevel(int &level, bool& charging) override {
static int last_level = 0;
static bool last_charging = false;
charging = axp2101_->IsCharging();
charging = pmic_->IsCharging();
if (charging != last_charging) {
power_save_timer_->WakeUp();
}
level = axp2101_->GetBatteryLevel();
if (level != last_level || charging != last_charging) {
last_level = level;
last_charging = charging;
ESP_LOGI(TAG, "Battery level: %d, charging: %d", level, charging);
}
static bool show_low_power_warning_ = false;
if (axp2101_->IsDischarging()) {
// 电量低于 10% 时，显示低电量警告
if (!show_low_power_warning_ && level <= 10) {
auto& app = Application::GetInstance();
app.Alert(Lang::Strings::WARNING, Lang::Strings::BATTERY_LOW, "sad", Lang::Sounds::P3_VIBRATION);
show_low_power_warning_ = true;
}
level = pmic_->GetBatteryLevel();
if (pmic_->IsDischarging()) {
power_save_timer_->SetEnabled(true);
} else {
if (show_low_power_warning_) {
auto& app = Application::GetInstance();
app.DismissAlert();
show_low_power_warning_ = false;
}
power_save_timer_->SetEnabled(false);
}
return true;