新增 DFRobot 行空板 K10 (#299)

* 添加DF设备ESP32-S3-K10

添加DFS3设备板子K10

* 完善DFRobot 行空板 K10适配

* Enable K10 RGB LED

* Enable K10 SetOutputVolume

* 优化K10按键处理

* 添加K10编译配置文件

---------

Co-authored-by: vonweller <154695311+vonweller@users.noreply.github.com>

main/boards/df-k10/config.h

@@ -0,0 +1,45 @@
+#ifndef _BOARD_CONFIG_H_
+#define _BOARD_CONFIG_H_
+
+#include <driver/gpio.h>
+
+#define AUDIO_INPUT_SAMPLE_RATE  24000
+#define AUDIO_OUTPUT_SAMPLE_RATE 24000
+
+#define AUDIO_INPUT_REFERENCE    true
+
+#define AUDIO_I2S_GPIO_MCLK GPIO_NUM_3
+#define AUDIO_I2S_GPIO_WS GPIO_NUM_38
+#define AUDIO_I2S_GPIO_BCLK GPIO_NUM_0
+#define AUDIO_I2S_GPIO_DIN  GPIO_NUM_39
+#define AUDIO_I2S_GPIO_DOUT GPIO_NUM_45
+
+#define AUDIO_CODEC_PA_PIN       GPIO_NUM_NC
+#define AUDIO_CODEC_I2C_SDA_PIN  GPIO_NUM_47
+#define AUDIO_CODEC_I2C_SCL_PIN  GPIO_NUM_48
+#define AUDIO_CODEC_ES8311_ADDR  ES8311_CODEC_DEFAULT_ADDR
+#define AUDIO_CODEC_ES7210_ADDR  0x23
+
+#define BUILTIN_LED_GPIO        GPIO_NUM_46
+#define BOOT_BUTTON_GPIO        GPIO_NUM_0
+#define VOLUME_UP_BUTTON_GPIO   GPIO_NUM_NC
+#define VOLUME_DOWN_BUTTON_GPIO GPIO_NUM_NC
+
+/* Expander */
+#define DRV_IO_EXP_INPUT_MASK  (IO_EXPANDER_PIN_NUM_2 | IO_EXPANDER_PIN_NUM_12)
+
+
+#define DISPLAY_WIDTH   240
+#define DISPLAY_HEIGHT  320
+#define DISPLAY_MIRROR_X false
+#define DISPLAY_MIRROR_Y true
+#define DISPLAY_SWAP_XY false
+
+#define DISPLAY_OFFSET_X  0
+#define DISPLAY_OFFSET_Y  0
+
+#define DISPLAY_BACKLIGHT_PIN GPIO_NUM_NC
+#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false
+
+
+#endif // _BOARD_CONFIG_H_