diff --git a/main/CMakeLists.txt b/main/CMakeLists.txt
index ba798668..a4b8f2b2 100644
--- a/main/CMakeLists.txt
+++ b/main/CMakeLists.txt
@@ -106,6 +106,8 @@ elseif(CONFIG_BOARD_TYPE_ECHOEAR)
set(BOARD_TYPE "echoear")
elseif(CONFIG_BOARD_TYPE_ESP32S3_Touch_AMOLED_1_8)
set(BOARD_TYPE "esp32-s3-touch-amoled-1.8")
+elseif(CONFIG_BOARD_TYPE_ESP32S3_Touch_AMOLED_2_06)
+ set(BOARD_TYPE "waveshare-s3-touch-amoled-2.06")
elseif(CONFIG_BOARD_TYPE_ESP32S3_Touch_AMOLED_1_75)
set(BOARD_TYPE "waveshare-s3-touch-amoled-1.75")
elseif(CONFIG_BOARD_TYPE_ESP32S3_Touch_LCD_1_85C)
diff --git a/main/Kconfig.projbuild b/main/Kconfig.projbuild
index 8bec4299..2cb27d67 100644
--- a/main/Kconfig.projbuild
+++ b/main/Kconfig.projbuild
@@ -148,6 +148,8 @@ choice BOARD_TYPE
config BOARD_TYPE_ESP32S3_Touch_AMOLED_1_8
bool "Waveshare ESP32-S3-Touch-AMOLED-1.8"
depends on IDF_TARGET_ESP32S3
+ config BOARD_TYPE_ESP32S3_Touch_AMOLED_2_06
+ bool "Waveshare ESP32-S3-Touch-AMOLED-2.06"
config BOARD_TYPE_ESP32S3_Touch_AMOLED_1_75
bool "Waveshare ESP32-S3-Touch-AMOLED-1.75"
depends on IDF_TARGET_ESP32S3
@@ -442,7 +444,7 @@ config USE_AUDIO_PROCESSOR
config USE_DEVICE_AEC
bool "Enable Device-Side AEC"
default n
- depends on USE_AUDIO_PROCESSOR && (BOARD_TYPE_ESP_BOX_3 || BOARD_TYPE_ESP_BOX || BOARD_TYPE_ESP_BOX_LITE || BOARD_TYPE_LICHUANG_DEV || BOARD_TYPE_ESP32S3_KORVO2_V3 || BOARD_TYPE_ESP32S3_Touch_AMOLED_1_75 || BOARD_TYPE_ESP32P4_WIFI6_Touch_LCD_4B || BOARD_TYPE_ESP32P4_WIFI6_Touch_LCD_XC)
+ depends on USE_AUDIO_PROCESSOR && (BOARD_TYPE_ESP_BOX_3 || BOARD_TYPE_ESP_BOX || BOARD_TYPE_ESP_BOX_LITE || BOARD_TYPE_LICHUANG_DEV || BOARD_TYPE_ESP32S3_KORVO2_V3 || BOARD_TYPE_ESP32S3_Touch_AMOLED_1_75 || BOARD_TYPE_ESP32S3_Touch_AMOLED_2_06 || BOARD_TYPE_ESP32P4_WIFI6_Touch_LCD_4B || BOARD_TYPE_ESP32P4_WIFI6_Touch_LCD_XC)
help
因为性能不够，不建议和微信聊天界面风格同时开启
diff --git a/main/boards/waveshare-s3-touch-amoled-2.06/README.md b/main/boards/waveshare-s3-touch-amoled-2.06/README.md
new file mode 100644
index 00000000..85b37446
--- /dev/null
+++ b/main/boards/waveshare-s3-touch-amoled-2.06/README.md
@@ -0,0 +1,11 @@
+# Waveshare ESP32-S3-Touch-AMOLED-1.75
+
+
+[ESP32-S3-Touch-AMOLED-2.06](https://www.waveshare.com/esp32-s3-touch-amoled-2.06.htm) is a high-performance, wearable watch-style development board designed by Waveshare. Based on the ESP32-S3R8 microcontroller, it integrates a 2.06inch AMOLED capacitive touch display, 6-axis IMU, RTC chip, audio codec chip, power management IC, and so on. Comes with a custom-designed case with a smartwatch-like appearance, making it ideal for prototyping and functional verification of wearable applications.
+
+## images
+
+| [ESP32-S3-Touch-AMOLED-2.06](https://www.waveshare.com/esp32-s3-touch-amoled-2.06.htm) |
+|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+| 
|
+
diff --git a/main/boards/waveshare-s3-touch-amoled-2.06/config.h b/main/boards/waveshare-s3-touch-amoled-2.06/config.h
new file mode 100644
index 00000000..6ad75a7e
--- /dev/null
+++ b/main/boards/waveshare-s3-touch-amoled-2.06/config.h
@@ -0,0 +1,43 @@
+#ifndef _BOARD_CONFIG_H_
+#define _BOARD_CONFIG_H_
+
+#include
+
+#define AUDIO_INPUT_SAMPLE_RATE 24000
+#define AUDIO_OUTPUT_SAMPLE_RATE 24000
+
+#define AUDIO_INPUT_REFERENCE true
+
+#define AUDIO_I2S_GPIO_MCLK GPIO_NUM_16
+#define AUDIO_I2S_GPIO_WS GPIO_NUM_45
+#define AUDIO_I2S_GPIO_BCLK GPIO_NUM_41
+#define AUDIO_I2S_GPIO_DIN GPIO_NUM_42
+#define AUDIO_I2S_GPIO_DOUT GPIO_NUM_40
+
+#define AUDIO_CODEC_PA_PIN GPIO_NUM_46
+#define AUDIO_CODEC_I2C_SDA_PIN GPIO_NUM_15
+#define AUDIO_CODEC_I2C_SCL_PIN GPIO_NUM_14
+#define AUDIO_CODEC_ES8311_ADDR ES8311_CODEC_DEFAULT_ADDR
+#define AUDIO_CODEC_ES7210_ADDR ES7210_CODEC_DEFAULT_ADDR
+
+#define BOOT_BUTTON_GPIO GPIO_NUM_0
+
+#define EXAMPLE_PIN_NUM_LCD_CS GPIO_NUM_12
+#define EXAMPLE_PIN_NUM_LCD_PCLK GPIO_NUM_11
+#define EXAMPLE_PIN_NUM_LCD_DATA0 GPIO_NUM_4
+#define EXAMPLE_PIN_NUM_LCD_DATA1 GPIO_NUM_5
+#define EXAMPLE_PIN_NUM_LCD_DATA2 GPIO_NUM_6
+#define EXAMPLE_PIN_NUM_LCD_DATA3 GPIO_NUM_7
+#define EXAMPLE_PIN_NUM_LCD_RST GPIO_NUM_8
+#define DISPLAY_WIDTH 410
+#define DISPLAY_HEIGHT 502
+#define DISPLAY_MIRROR_X false
+#define DISPLAY_MIRROR_Y false
+#define DISPLAY_SWAP_XY false
+
+#define DISPLAY_OFFSET_X 0
+#define DISPLAY_OFFSET_Y 0
+
+#define DISPLAY_BACKLIGHT_PIN GPIO_NUM_NC
+#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false
+#endif // _BOARD_CONFIG_H_
diff --git a/main/boards/waveshare-s3-touch-amoled-2.06/config.json b/main/boards/waveshare-s3-touch-amoled-2.06/config.json
new file mode 100644
index 00000000..3a95f74a
--- /dev/null
+++ b/main/boards/waveshare-s3-touch-amoled-2.06/config.json
@@ -0,0 +1,12 @@
+{
+ "target": "esp32s3",
+ "builds": [
+ {
+ "name": "waveshare-s3-touch-amoled-2.06",
+ "sdkconfig_append": [
+ "CONFIG_USE_WECHAT_MESSAGE_STYLE=n",
+ "CONFIG_USE_DEVICE_AEC=y"
+ ]
+ }
+ ]
+}
\ No newline at end of file
diff --git a/main/boards/waveshare-s3-touch-amoled-2.06/esp32-s3-touch-amoled-2.06.cc b/main/boards/waveshare-s3-touch-amoled-2.06/esp32-s3-touch-amoled-2.06.cc
new file mode 100644
index 00000000..e45c4004
--- /dev/null
+++ b/main/boards/waveshare-s3-touch-amoled-2.06/esp32-s3-touch-amoled-2.06.cc
@@ -0,0 +1,366 @@
+#include "wifi_board.h"
+#include "display/lcd_display.h"
+#include "esp_lcd_sh8601.h"
+#include "font_awesome_symbols.h"
+
+#include "codecs/box_audio_codec.h"
+#include "application.h"
+#include "button.h"
+#include "led/single_led.h"
+#include "mcp_server.h"
+#include "config.h"
+#include "power_save_timer.h"
+#include "axp2101.h"
+#include "i2c_device.h"
+#include
+
+#include
+#include
+#include
+#include
+#include "settings.h"
+
+#include
+#include
+#include
+
+#define TAG "WaveshareEsp32s3TouchAMOLED2inch06"
+
+LV_FONT_DECLARE(font_puhui_30_4);
+LV_FONT_DECLARE(font_awesome_30_4);
+
+class Pmic : public Axp2101 {
+public:
+ Pmic(i2c_master_bus_handle_t i2c_bus, uint8_t addr) : Axp2101(i2c_bus, addr) {
+ WriteReg(0x22, 0b110); // PWRON > OFFLEVEL as POWEROFF Source enable
+ WriteReg(0x27, 0x10); // hold 4s to power off
+
+ // Disable All DCs but DC1
+ WriteReg(0x80, 0x01);
+ // Disable All LDOs
+ WriteReg(0x90, 0x00);
+ WriteReg(0x91, 0x00);
+
+ // Set DC1 to 3.3V
+ WriteReg(0x82, (3300 - 1500) / 100);
+
+ // Set ALDO1 to 3.3V
+ WriteReg(0x92, (3300 - 500) / 100);
+ WriteReg(0x93, (3300 - 500) / 100);
+
+ // Enable ALDO1(MIC)
+ WriteReg(0x90, 0x03);
+
+ WriteReg(0x64, 0x02); // CV charger voltage setting to 4.1V
+
+ WriteReg(0x61, 0x02); // set Main battery precharge current to 50mA
+ WriteReg(0x62, 0x0A); // set Main battery charger current to 400mA ( 0x08-200mA, 0x09-300mA, 0x0A-400mA )
+ WriteReg(0x63, 0x01); // set Main battery term charge current to 25mA
+ }
+};
+
+#define LCD_OPCODE_WRITE_CMD (0x02ULL)
+#define LCD_OPCODE_READ_CMD (0x03ULL)
+#define LCD_OPCODE_WRITE_COLOR (0x32ULL)
+
+static const sh8601_lcd_init_cmd_t vendor_specific_init[] = {
+ // set display to qspi mode
+ {0x11, (uint8_t []){0x00}, 0, 120},
+ {0xC4, (uint8_t []){0x80}, 1, 0},
+ {0x44, (uint8_t []){0x01, 0xD1}, 2, 0},
+ {0x35, (uint8_t []){0x00}, 1, 0},
+ {0x53, (uint8_t []){0x20}, 1, 10},
+ {0x63, (uint8_t []){0xFF}, 1, 10},
+ {0x51, (uint8_t []){0x00}, 1, 10},
+ {0x2A, (uint8_t []){0x00,0x16,0x01,0xAF}, 4, 0},
+ {0x2B, (uint8_t []){0x00,0x00,0x01,0xF5}, 4, 0},
+ {0x29, (uint8_t []){0x00}, 0, 10},
+ {0x51, (uint8_t []){0xFF}, 1, 0},
+};
+
+// 在waveshare_amoled_2_06类之前添加新的显示类
+class CustomLcdDisplay : public SpiLcdDisplay {
+public:
+ static void rounder_event_cb(lv_event_t* e) {
+ lv_area_t* area = (lv_area_t* )lv_event_get_param(e);
+ uint16_t x1 = area->x1;
+ uint16_t x2 = area->x2;
+
+ uint16_t y1 = area->y1;
+ uint16_t y2 = area->y2;
+
+ // round the start of coordinate down to the nearest 2M number
+ area->x1 = (x1 >> 1) << 1;
+ area->y1 = (y1 >> 1) << 1;
+ // round the end of coordinate up to the nearest 2N+1 number
+ area->x2 = ((x2 >> 1) << 1) + 1;
+ area->y2 = ((y2 >> 1) << 1) + 1;
+ }
+
+ CustomLcdDisplay(esp_lcd_panel_io_handle_t io_handle,
+ esp_lcd_panel_handle_t panel_handle,
+ int width,
+ int height,
+ int offset_x,
+ int offset_y,
+ bool mirror_x,
+ bool mirror_y,
+ bool swap_xy)
+ : SpiLcdDisplay(io_handle, panel_handle,
+ width, height, offset_x, offset_y, mirror_x, mirror_y, swap_xy,
+ {
+ .text_font = &font_puhui_30_4,
+ .icon_font = &font_awesome_30_4,
+#if CONFIG_USE_WECHAT_MESSAGE_STYLE
+ .emoji_font = font_emoji_32_init(),
+#else
+ .emoji_font = font_emoji_64_init(),
+#endif
+ })
+ {
+ DisplayLockGuard lock(this);
+ lv_obj_set_style_pad_left(status_bar_, LV_HOR_RES* 0.1, 0);
+ lv_obj_set_style_pad_right(status_bar_, LV_HOR_RES* 0.1, 0);
+ lv_display_add_event_cb(display_, rounder_event_cb, LV_EVENT_INVALIDATE_AREA, NULL);
+ }
+};
+
+class CustomBacklight : public Backlight {
+public:
+ CustomBacklight(esp_lcd_panel_io_handle_t panel_io) : Backlight(), panel_io_(panel_io) {}
+
+protected:
+ esp_lcd_panel_io_handle_t panel_io_;
+
+ virtual void SetBrightnessImpl(uint8_t brightness) override {
+ auto display = Board::GetInstance().GetDisplay();
+ DisplayLockGuard lock(display);
+ uint8_t data[1] = {((uint8_t)((255* brightness) / 100))};
+ int lcd_cmd = 0x51;
+ lcd_cmd &= 0xff;
+ lcd_cmd <<= 8;
+ lcd_cmd |= LCD_OPCODE_WRITE_CMD << 24;
+ esp_lcd_panel_io_tx_param(panel_io_, lcd_cmd, &data, sizeof(data));
+ }
+};
+
+class WaveshareEsp32s3TouchAMOLED2inch06 : public WifiBoard {
+private:
+ i2c_master_bus_handle_t i2c_bus_;
+ Pmic* pmic_ = nullptr;
+ Button boot_button_;
+ CustomLcdDisplay* display_;
+ CustomBacklight* backlight_;
+ PowerSaveTimer* power_save_timer_;
+
+ void InitializePowerSaveTimer() {
+ power_save_timer_ = new PowerSaveTimer(-1, 60, 300);
+ power_save_timer_->OnEnterSleepMode([this]() {
+ ESP_LOGI(TAG, "Enabling sleep mode");
+ auto display = GetDisplay();
+ display->SetChatMessage("system", "");
+ display->SetEmotion("sleepy");
+ GetBacklight()->SetBrightness(20); });
+ power_save_timer_->OnExitSleepMode([this]() {
+ auto display = GetDisplay();
+ display->SetChatMessage("system", "");
+ display->SetEmotion("neutral");
+ GetBacklight()->RestoreBrightness(); });
+ power_save_timer_->OnShutdownRequest([this](){
+ pmic_->PowerOff(); });
+ power_save_timer_->SetEnabled(true);
+ }
+
+ void InitializeCodecI2c() {
+ // Initialize I2C peripheral
+ i2c_master_bus_config_t i2c_bus_cfg = {
+ .i2c_port = I2C_NUM_0,
+ .sda_io_num = AUDIO_CODEC_I2C_SDA_PIN,
+ .scl_io_num = AUDIO_CODEC_I2C_SCL_PIN,
+ .clk_source = I2C_CLK_SRC_DEFAULT,
+ .flags = {
+ .enable_internal_pullup = 1,
+ },
+ };
+ ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_cfg, &i2c_bus_));
+ }
+
+ void InitializeAxp2101() {
+ ESP_LOGI(TAG, "Init AXP2101");
+ pmic_ = new Pmic(i2c_bus_, 0x34);
+ }
+
+ void InitializeSpi() {
+ spi_bus_config_t buscfg = {};
+ buscfg.sclk_io_num = EXAMPLE_PIN_NUM_LCD_PCLK;
+ buscfg.data0_io_num = EXAMPLE_PIN_NUM_LCD_DATA0;
+ buscfg.data1_io_num = EXAMPLE_PIN_NUM_LCD_DATA1;
+ buscfg.data2_io_num = EXAMPLE_PIN_NUM_LCD_DATA2;
+ buscfg.data3_io_num = EXAMPLE_PIN_NUM_LCD_DATA3;
+ buscfg.max_transfer_sz = DISPLAY_WIDTH* DISPLAY_HEIGHT* sizeof(uint16_t);
+ buscfg.flags = SPICOMMON_BUSFLAG_QUAD;
+ ESP_ERROR_CHECK(spi_bus_initialize(SPI2_HOST, &buscfg, SPI_DMA_CH_AUTO));
+ }
+
+ void InitializeButtons() {
+ boot_button_.OnClick([this]() {
+ auto& app = Application::GetInstance();
+ if (app.GetDeviceState() == kDeviceStateStarting && !WifiStation::GetInstance().IsConnected()) {
+ ResetWifiConfiguration();
+ }
+ app.ToggleChatState();
+ });
+
+#if CONFIG_USE_DEVICE_AEC
+ boot_button_.OnDoubleClick([this]() {
+ auto& app = Application::GetInstance();
+ if (app.GetDeviceState() == kDeviceStateIdle) {
+ app.SetAecMode(app.GetAecMode() == kAecOff ? kAecOnDeviceSide : kAecOff);
+ }
+ });
+#endif
+ }
+
+ void InitializeSH8601Display() {
+ esp_lcd_panel_io_handle_t panel_io = nullptr;
+ esp_lcd_panel_handle_t panel = nullptr;
+
+ // 液晶屏控制IO初始化
+ ESP_LOGD(TAG, "Install panel IO");
+ esp_lcd_panel_io_spi_config_t io_config = SH8601_PANEL_IO_QSPI_CONFIG(
+ EXAMPLE_PIN_NUM_LCD_CS,
+ nullptr,
+ nullptr);
+ ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi(SPI2_HOST, &io_config, &panel_io));
+
+ // 初始化液晶屏驱动芯片
+ ESP_LOGD(TAG, "Install LCD driver");
+ const sh8601_vendor_config_t vendor_config = {
+ .init_cmds = &vendor_specific_init[0],
+ .init_cmds_size = sizeof(vendor_specific_init) / sizeof(sh8601_lcd_init_cmd_t),
+ .flags = {
+ .use_qspi_interface = 1,
+ }};
+
+ esp_lcd_panel_dev_config_t panel_config = {};
+ panel_config.reset_gpio_num = EXAMPLE_PIN_NUM_LCD_RST;
+ panel_config.rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB;
+ panel_config.bits_per_pixel = 16;
+ panel_config.vendor_config = (void* )&vendor_config;
+ ESP_ERROR_CHECK(esp_lcd_new_panel_sh8601(panel_io, &panel_config, &panel));
+ esp_lcd_panel_set_gap(panel, 0x16, 0);
+ esp_lcd_panel_reset(panel);
+ esp_lcd_panel_init(panel);
+ esp_lcd_panel_invert_color(panel, false);
+ esp_lcd_panel_mirror(panel, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y);
+ esp_lcd_panel_disp_on_off(panel, true);
+ display_ = new CustomLcdDisplay(panel_io, panel,
+ DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_OFFSET_X, DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY);
+ backlight_ = new CustomBacklight(panel_io);
+ backlight_->RestoreBrightness();
+ }
+
+ void InitializeTouch() {
+ esp_lcd_touch_handle_t tp;
+ esp_lcd_touch_config_t tp_cfg = {
+ .x_max = DISPLAY_WIDTH - 1,
+ .y_max = DISPLAY_HEIGHT - 1,
+ .rst_gpio_num = GPIO_NUM_9,
+ .int_gpio_num = GPIO_NUM_38,
+ .levels = {
+ .reset = 0,
+ .interrupt = 0,
+ },
+ .flags = {
+ .swap_xy = 0,
+ .mirror_x = 0,
+ .mirror_y = 0,
+ },
+ };
+ esp_lcd_panel_io_handle_t tp_io_handle = NULL;
+ esp_lcd_panel_io_i2c_config_t tp_io_config = ESP_LCD_TOUCH_IO_I2C_FT5x06_CONFIG();
+ tp_io_config.scl_speed_hz = 400* 1000;
+ ESP_ERROR_CHECK(esp_lcd_new_panel_io_i2c(i2c_bus_, &tp_io_config, &tp_io_handle));
+ ESP_LOGI(TAG, "Initialize touch controller");
+ ESP_ERROR_CHECK(esp_lcd_touch_new_i2c_ft5x06(tp_io_handle, &tp_cfg, &tp));
+ const lvgl_port_touch_cfg_t touch_cfg = {
+ .disp = lv_display_get_default(),
+ .handle = tp,
+ };
+ lvgl_port_add_touch(&touch_cfg);
+ ESP_LOGI(TAG, "Touch panel initialized successfully");
+ }
+
+ // 初始化工具
+ void InitializeTools() {
+ auto &mcp_server = McpServer::GetInstance();
+ mcp_server.AddTool("self.system.reconfigure_wifi",
+ "Reboot the device and enter WiFi configuration mode.\n"
+ "**CAUTION** You must ask the user to confirm this action.",
+ PropertyList(), [this](const PropertyList& properties) {
+ ResetWifiConfiguration();
+ return true;
+ });
+ }
+
+public:
+ WaveshareEsp32s3TouchAMOLED2inch06() : boot_button_(BOOT_BUTTON_GPIO) {
+ InitializePowerSaveTimer();
+ InitializeCodecI2c();
+ InitializeAxp2101();
+ InitializeSpi();
+ InitializeSH8601Display();
+ InitializeTouch();
+ InitializeButtons();
+ InitializeTools();
+ }
+
+ virtual AudioCodec* GetAudioCodec() override {
+ static BoxAudioCodec audio_codec(
+ i2c_bus_,
+ AUDIO_INPUT_SAMPLE_RATE,
+ AUDIO_OUTPUT_SAMPLE_RATE,
+ AUDIO_I2S_GPIO_MCLK,
+ AUDIO_I2S_GPIO_BCLK,
+ AUDIO_I2S_GPIO_WS,
+ AUDIO_I2S_GPIO_DOUT,
+ AUDIO_I2S_GPIO_DIN,
+ AUDIO_CODEC_PA_PIN,
+ AUDIO_CODEC_ES8311_ADDR,
+ AUDIO_CODEC_ES7210_ADDR,
+ AUDIO_INPUT_REFERENCE);
+ return &audio_codec;
+ }
+
+ virtual Display* GetDisplay() override {
+ return display_;
+ }
+
+ virtual Backlight* GetBacklight() override {
+ return backlight_;
+ }
+
+ virtual bool GetBatteryLevel(int &level, bool &charging, bool &discharging) override {
+ static bool last_discharging = false;
+ charging = pmic_->IsCharging();
+ discharging = pmic_->IsDischarging();
+ if (discharging != last_discharging)
+ {
+ power_save_timer_->SetEnabled(discharging);
+ last_discharging = discharging;
+ }
+
+ level = pmic_->GetBatteryLevel();
+ return true;
+ }
+
+ virtual void SetPowerSaveMode(bool enabled) override {
+ if (!enabled)
+ {
+ power_save_timer_->WakeUp();
+ }
+ WifiBoard::SetPowerSaveMode(enabled);
+ }
+};
+
+DECLARE_BOARD(WaveshareEsp32s3TouchAMOLED2inch06);