- Compute velocities as px/ms from VelocityTracker, instead of
computing px/s and dividing by 1000 in various places
- Use quickstep_fling_threshold_speed in TriggerSwipeUpTouchTracker
instead of ViewConfiguration#getScaledMinimumFlingVelocity
- Check MotionPauseDetector to determine whether a fling is
sufficient to escape after pause, in additon to above threshold
Bug: 159089437
Change-Id: Ib0fae7804e1f008f3b6ab37d6c463352c224b0e4
- Update MotionPauseListener to have 2 methods: the existing
onMotionPauseChanged(isPaused) and onMotionPauseDetected()
- onMotionPauseDetected is the default as most listeners only
care about the first detected pause
- AbsSwipeUpHandler still listens to pause changes, to help
determine the end target at the end of the gesture
Bug: 159089437
Change-Id: I6d14f106cdcbe4e07d8dddba1cee909a963615b1
Fixes issue with jittery displaying of suggestion chip, when entering overview.
Merging into master manually as automerger failed.
Tested:Manual
Change-Id: I8228c51b22d550cb8f0aa559f997060b571763f1
Previously we did this only from a settled state, but now we also
do it during the transition to NORMAL.
Test: open all apps. Then, swipe down to home and back up to all
apps (from above the top of all apps).
Fixes: 159856104
Change-Id: Ib78c6a41d5fa17dd26a7df4e9069e0ada1f46dd0
NavModeChange listener relies on rotationTouchHelper
to be non-null, but we instantiate rotationTouchHelper
after nav mode changes are fired off.
Fixes: 166303464
Change-Id: Iab92d0fe0ee842d907d7226dfd9ca599e7729675
- In fake portrait, fade out instead of translating offscreen, as
the orientation doesn't map to where RecentsView actually lives
- From OverviewModalTaskState, start from > 1 scale, and use
OverviewToHomeAnim (to ensure RecentsView doesn't fade out etc)
- To keep parameter list sane, added RecentsParams to
AnimatorControllerWithResistance which has the new startScale
(set to current scale for modal state) and renames the old
RecentsParams to RecentsResistanceParams. Sorry if that's
confusing.
Bug: 144170434
Change-Id: I437f0d18cad4c94feea25954aed3390acedcaed5
Animating this new property allows us to adjust the scrim without
competing with other state animations that could be setting the
scrim progress. Also reset scrimMultipler = 1 for state transitions.
Test: Swipe from home to overview, then during that transition swipe
from overview to home; when the former transition ends while the
second is still in progress, ensure scrim value doesn't jump
Bug: 144170434
Change-Id: I44b57ced1c6902e558fe1818bcbf11ceb4ff2f6f
Test: go to overview, dismiss a task, swipe up to go home during the
transition (easier to try with animation duraation scaled up)
Bug: 144170434
Change-Id: I28b846b43260179aeac877351a7069743f66f3ea
Introduces a separate database for minimal device mode.
When minimal device mode is enabled/disabled:
1. WellbeingModel receives onChange event from ContentObserver
2. WellbeingModel called DWB's ContentProvider for latest state in
minimal device mode
3. Based on the state, WellbeingModel calls LauncherProvider to put
launcher into normal/minimal mode.
4. When going from normal -> minimal, Launcher switches to a different
database, namely minimal.db, then proceed to database initialization.
5. If the database hasn't been initialized yet, Launcher will call
ContentResolver#openInputStream with following uri:
content://com.google.android.apps.wellbeing.api/launcher_layout
to get the default layout xml.
6. The default layout is then saved in database, and the database is
considered initialized and doesn't need to go through step 5 again in
the future.
7. In case of minimal -> normal, Launcher switches back to its original
database (e.g. launcher.db if the grid size is 5x5), then reload launcher.
Bug: 161462256
Change-Id: I6bafa66440da23281f63454b698ea56b15960022
Probably a recent change updates the rect when reaching overview, which wasn't happening before. Regardless, we shouldn't have copied the rect by reference since the referenced copy can be changed.
Fixes: 165143463
Test: manual
Change-Id: I9315a20226f0a4b3440ce5ee6cc1f4ed1ddca487
We no longer support the "peeking" model where the shelf would
peek on motion pause from an app and overview would peek on motion
pause from home. Thus, removed/inlined the following:
- FlingAndHoldTouchController (merged into its sole subclass
NoButtonNavbarToOverviewTouchController)
- ShelfPeekAnim
- OverviewPeekState
Change-Id: I066a3ad2636fde4786089c922b896bf1e03361fd
This way we mark the the current state as NORMAL at the start of
the animation, and cancel it as part of other state transitions.
This allows us to interact with launcher (e.g. to go to all apps
or pull down the notification shade) during the animation.
Also use OverviewToHomeAnim from RecentsView#startHome() to
ensure the animation is consistent, e.g. doesn't fade out
RecentsView, scrolls to page 1, etc.
Bug: 144170434
Change-Id: I5348565b9e705d8ffba39818dde9efe82b16bb7a
Merged-In: I5348565b9e705d8ffba39818dde9efe82b16bb7a
This way we mark the the current state as NORMAL at the start of
the animation, and cancel it as part of other state transitions.
This allows us to interact with launcher (e.g. to go to all apps
or pull down the notification shade) during the animation.
Also use OverviewToHomeAnim from RecentsView#startHome() to
ensure the animation is consistent, e.g. doesn't fade out
RecentsView, scrolls to page 1, etc.
Bug: 144170434
Change-Id: I5348565b9e705d8ffba39818dde9efe82b16bb7a
The loss of precision was causing us to miscalculate the age of
events, and thus not detecting any pause due to denominator = 0.
Test: have a device that hasn't been rebooted for a certain
amount of time such that SystemClock#uptimeMillis can't be
accurately converted to a float, then try to swipe up and hold
Fixes: 160568387
Change-Id: Idef112187f34a18feea7e6a0b77258626f9d0ed4
For both NoButtonNavbarToOverviewTouchController and
NavBarToHomeTouchController:
- Have consistent resistance applied such that RecentsView scales
down and translates up slightly (but not as much as from an app)
- Have consistent animation to home if you fling to that state
rather than stay in overview. This is handled by a new class,
OverviewToHomeAnim, which consolidates logic from NBTHTC and
overrides some interpolators such that RecentsView doesn't fade
out or translate downwards during the animation (it just slides
off the screen while the home animation plays).
Also make overview actions not clickable when alpha == 0, so that
you can tap the hotseat/qsb during the transition from home to
overview.
Bug: 144170434
Change-Id: Ic291f285ff2f63c477633c48d4fadb23cf70c28a
This reverts commit f3bc797182.
Reason for revert: updating upstream, need to wait to cherry-pick until that's approved
Change-Id: I702286dba66fb4582ab682a5b0b8cd80ccebf346
For both NoButtonNavbarToOverviewTouchController and
NavBarToHomeTouchController:
- Have consistent resistance applied such that RecentsView scales
down and translates up slightly (but not as much as from an app)
- Have consistent animation to home if you fling to that state
rather than stay in overview. This is handled by a new class,
OverviewToHomeAnim, which consolidates logic from NBTHTC and
overrides some interpolators such that RecentsView doesn't fade
out or translate downwards during the animation (it just slides
off the screen while the home animation plays).
Also make overview actions not clickable when alpha == 0, so that
you can tap the hotseat/qsb during the transition from home to
overview.
Bug: 144170434
Change-Id: Ic291f285ff2f63c477633c48d4fadb23cf70c28a
Now recents view follows your finger all the way to the top of the
screen. Specifically, your finger tracks the bottom of the window
until resistance starts (when RecentsView is at 75% scale), then
we add translation to compensate for the slower rate of scaling
down, such that your finger slips to the top of the window by the
time it reaches the top of the screen.
Also reset this translation back to 0 in the state handlers.
Bug: 149934536
Fixes: 158701272
Change-Id: Iaee58da758d422f0173c29d002f5c451ce0c1809
- Rename "pullback" to "resistance" to reduce confusion.
- Remove mDragLengthFactorStartPullback & mDragLengthFactorMaxPullback
- Add AnimatorControllerWithResistance, which has 2 controllers, one
for the normal shift to overview, then one to apply the resistance
when swiping beyond that.
- Don't hack animator interpolators/progress; insteaad, allow progress
to go > 1 (which will run the separate resistance animator).
- Don't start launcher controller separately from window controller;
instead, both are controlled by mCurrentShift in updateFinalShift().
- The resistance animation logic is shared by both the active window
and launcher (RecentsView).
Bug: 149934536
Change-Id: Ib0f9da18e10cc9ddf1a2f82ed767f237c89d3a41
Merged-In: Ib0f9da18e10cc9ddf1a2f82ed767f237c89d3a41
- Rename "pullback" to "resistance" to reduce confusion.
- Remove mDragLengthFactorStartPullback & mDragLengthFactorMaxPullback
- Add AnimatorControllerWithResistance, which has 2 controllers, one
for the normal shift to overview, then one to apply the resistance
when swiping beyond that.
- Don't hack animator interpolators/progress; insteaad, allow progress
to go > 1 (which will run the separate resistance animator).
- Don't start launcher controller separately from window controller;
instead, both are controlled by mCurrentShift in updateFinalShift().
- The resistance animation logic is shared by both the active window
and launcher (RecentsView).
Bug: 149934536
Change-Id: Ib0f9da18e10cc9ddf1a2f82ed767f237c89d3a41
